PARKER D1VW001C Directional Valve
Overview:
HYRIG can supply the PARKER D1VW001C and related hydraulic components. This NG6 directional valve uses a 001 spool with a C-position configuration, providing an all-ports-blocked centre condition for load holding.
The 001 spool provides an all-ports-blocked centre condition: in the centre position, P, T, A, and B are all blocked, holding the actuator in position. The C position indicates a double-solenoid, 3-position, spring-centred configuration.
Verify the spool type (001), spool position (C), and voltage code (J = 24V DC, K = 12V DC) when replacing.
Used in PARKER D1VW NG6 directional valve stacks. For related components, view PARKER D1VW & D3W Directional Valves.
Need to confirm the spool type or voltage for a load-holding application? Contact HYRIG with your requirements.
Suitable for machine tools, clamping circuits, and applications requiring the actuator to hold position when the valve is centred.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D1VW001C selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.