PARKER D1VW002C Directional Valve
Overview:
HYRIG can supply the PARKER D1VW002C and related hydraulic components. This NG6 directional valve uses a 002 spool with a C-position configuration, providing an all-ports-open centre condition for flow circulation.
The 002 spool provides an all-ports-open centre condition: in the centre position, P, T, A, and B are all connected, allowing flow to circulate freely. The C position indicates a double-solenoid, 3-position, spring-centred configuration.
Verify the spool type (002), spool position (C), and voltage code (J = 24V DC, K = 12V DC) when replacing. All code positions must match.
Used in PARKER D1VW NG6 directional valve stacks. For related components, view PARKER D1VW & D3W Directional Valves.
Need to confirm the spool type, voltage, or seal material? Contact HYRIG with your system requirements.
Suitable for machine tools and hydraulic systems requiring an all-ports-open centre condition for flow circulation or actuator float.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D1VW002C selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.