PARKER D81VW Directional Valve Series (NG25)
Overview:
HYRIG can supply the PARKER D81VW series and related hydraulic components. These 5-chamber pilot-operated directional spool valves are designed for NG25 interfaces, providing reliable high-flow control with low pressure drop.
| Model Code | Spool Type | Centre Condition | Spool Position | Max Flow |
|---|---|---|---|---|
| D81VW030B | 030 | Open crossover | B (2-pos, spring offset) | 700 L/min |
| D81VW020B | 020 | Closed crossover | B (2-pos, spring offset) | 700 L/min |
| D81VW002C | 002 | All ports open | C (3-pos, spring centred) | 700 L/min |
| D81VW001C | 001 | All ports blocked | C (3-pos, spring centred) | 700 L/min |
| D81VW026H | 026 | B and T blocked | H (2-pos, spring offset) | 700 L/min |
Data source: PARKER catalog MSG14-2500/US and HY14-1600/US.
For the 030B spool variant, view PARKER D81VW030B. For the 002C spool variant, view PARKER D81VW002C. For the 020B closed-crossover variant, view PARKER D81VW020B. For the 026H B&T-blocked variant, view PARKER D81VW026H.
Note: Other spool/position combinations (001C, 020H, 026B, 030D, etc.) are available on request.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-08 (CETOP 8 / NFPA D08) |
| Mounting Bolt Pattern | 4 × M12 |
| Approx. Weight | 17.9–19.6 kg (depending on configuration) |
The spool type code (001/002/020/026/030 etc.) determines the flow paths in each position. The spool position code (B/C/H/D) specifies solenoid configuration and spring/detent behaviour. The voltage code (J = 24V DC, K = 12V DC) must be specified at order. All code positions must match when replacing.
Need to confirm the correct spool type, voltage, or pilot supply configuration for your NG25 circuit? Contact HYRIG with your system requirements, and we will match the correct D81VW model code.
Used for controlling the direction of very high-volume hydraulic flow in large presses, heavy machinery, and marine/materials handling systems.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER D81VW series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.