PARKER DWL/DWK Pressure Reducing Valve Series
Overview:
HYRIG can supply the PARKER DWL and DWK series and related hydraulic components. These valves maintain the pressure at the secondary side (port A) at the set value, using a sliding spool with a flow control valve to keep pilot flow constant for fast response.
| Parameter | Value |
|---|---|
| Mounting Standard | Contact factory |
| Mounting Bolt Pattern | Contact factory |
| Port Size | 1/4" / 3/8" / 1/2" (NPT/BSPP) |
When replacing a DWL/DWK valve, verify the pressure setting code (15, 20, etc.) and the port size. Contact HYRIG with the full nameplate code for an exact replacement.
Need to confirm the pressure setting or availability of a DWL/DWK valve? Send us a photo of the nameplate, and HYRIG will verify the correct configuration.
Used in hydraulic systems where a stable reduced pressure is required at the secondary side, such as clamping circuits or pilot lines.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER DWL/DWK series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.