PARKER PRDM/PRM Sandwich Reducing Valve Series
Overview:
HYRIG can supply the PARKER PRDM and PRM series and related hydraulic components. These sandwich-mounted valves provide stable secondary pressure reduction for specific branches of a hydraulic circuit.
| Model Code | Size | Controlled Port | Max Pressure | Max Flow |
|---|---|---|---|---|
| PRDM2PP | NG06 | P-port | 350 bar | 40 L/min |
| PRDM2AA | NG06 | A-port | 350 bar | 40 L/min |
| PRDM2BB | NG06 | B-port | 350 bar | 40 L/min |
| PRM3PP | NG10 | P-port | 350 bar | Contact factory |
| PRM3AA | NG10 | A-port | 350 bar | Contact factory |
| PRM3BB | NG10 | B-port | 350 bar | Contact factory |
Data source: PARKER catalog MSG14-2500 and distributor listings.
For the specific NG06 P-port valve, view PARKER PRDM2PP Sandwich Reducing Valve.
| Parameter | PRDM2 (NG06) | PRM3 (NG10) |
|---|---|---|
| Mounting Standard | ISO 4401-03 (CETOP 3) | ISO 4401-05 (CETOP 5) |
| Mounting Bolt Pattern | 4 × M5 | 4 × M6 |
When replacing a PRDM/PRM valve, confirm which line (P, A, or B) requires reduction. Verify the required secondary pressure range and ensure the sandwich module fits your manifold stack.
Need to reduce pressure on a specific actuator line? Tell us your primary pressure and desired secondary pressure, and HYRIG will provide the correct PRDM/PRM model code.
Used in hydraulic manifolds to provide reduced pressure for pilot circuits, clamping systems, or specific actuators without affecting the main system pressure.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER PRDM/PRM series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.