PARKER FM2 Series (NG6) Sandwich Throttle Valves
Overview:
HYRIG can supply the PARKER FM2 series and related hydraulic components. These double throttle check valves are designed for NG6 interfaces, providing meter-out flow control on both A and B ports.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-03 (CETOP 3) |
| Mounting Bolt Pattern | 4 × M5 |
| Approx. Weight | 1.3 kg |
When replacing an FM2 valve, verify the needle design (D = fine V-notch, omit = standard conical) and the adjustment type (K = knob, S = hex socket). The FM2 can be flipped 180° for meter-in applications, so confirm the original mounting orientation.
Need to confirm the exact needle design or adjustment type for your FM2 valve? Contact HYRIG with your nameplate details.
Used for precise speed control of both actuator directions in machine tools and hydraulic systems with NG6 interfaces.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER FM2 series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.