PARKER FM3 Series (NG10) Sandwich Throttle Valves
Overview:
HYRIG can supply the PARKER FM3 series and related hydraulic components. These double throttle check valves are designed for NG10 interfaces, providing meter-out flow control on both A and B ports.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-05 (CETOP 5) |
| Mounting Bolt Pattern | 4 × M6 |
| Approx. Weight | 2.4 kg |
The FM3 shares the same needle and adjustment options as the FM2 (D for fine V-notch, K for knob, S for hex socket). Confirm the original suffix when ordering.
Need to confirm flow capacity or needle design for an NG10 application? Contact HYRIG with your requirements.
Used for precise speed control in medium-flow hydraulic systems, such as larger machine tools and industrial presses.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER FM3 series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.