PARKER FM2DDF Throttle Check Valve
Overview:
HYRIG can supply the PARKER FM2DDF and related hydraulic components. The FM2DDF is a double throttle check valve in a sandwich plate design, used for independent meter-out flow regulation on both A and B ports.
The FM2DDF is a meter-out valve. Flow from the directional valve to the actuator passes freely through the integral check valve. Flow returning from the actuator is throttled by the adjustable needle, allowing independent speed control of both A and B lines.
The FM2DDF is a meter-out valve. The FM2 series can be inverted to function as a meter-in throttle if required. When replacing, verify whether the original installation was meter-in or meter-out, as the mounting orientation determines the flow direction.
Used in PARKER sandwich valve stacks beneath directional control valves. For related components, view PARKER FM Series Sandwich Throttle Valves.
Need to confirm the needle design (Standard conical vs. Fine V-notch) or the meter-in/meter-out orientation? Send us your nameplate details, and HYRIG will match the replacement precisely.
Suitable for machine tools, injection molding machines, and hydraulic systems requiring independent speed control of both actuator directions with fine adjustment capability.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER FM2DDF selection and ordering, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.