PARKER FM6DDF Throttle Check Valve
Overview:
HYRIG can supply the PARKER FM6DDF and related hydraulic components. The FM6DDF is a double throttle check valve in a sandwich plate design for NG25 interfaces. The FM6 size is meter-out only.
The FM6 series is meter-out only and cannot be converted to meter-in throttling. The valve permits free flow from the directional valve to the actuator and regulates return flow from the actuator on both A and B ports.
When replacing an FM6DDF, confirm that the original was a meter-out configuration. The FM6 is not available in a meter-in version.
Used in high-flow PARKER sandwich valve stacks for NG25 circuits. For related components, view PARKER FM Series Sandwich Throttle Valves.
Need to confirm flow capacity or compatibility with your NG25 stack? Contact HYRIG with your system parameters.
Suitable for large hydraulic systems requiring independent meter-out speed control on both actuator lines, such as heavy-duty presses and large injection molding machines.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER FM6DDF selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.