PARKER Manapak Check & Pilot Check Valves
Overview:
HYRIG can supply the PARKER Manapak check valve range and related hydraulic components. These valves are used for leakage-free blocking and pilot-controlled reverse flow in hydraulic circuits.
| Series | Valve Function | Mounting Type | Sizes | Max Pressure | Max Flow |
|---|---|---|---|---|---|
| CM2 | Sandwich check valve | Sandwich | NG6 | 350 bar | 60–77 L/min |
| CM3 | Sandwich check valve | Sandwich | NG10 | 350 bar | 113 L/min |
| CPOM | Pilot-operated check valve | Sandwich | NG6, NG10, NG16 | 350 bar | 54–303 L/min |
| SVL | Pilot-operated check valve | Slip-in | NG15, NG20 | 207 bar | 250–450 L/min |
Data source: PARKER catalog HY14-2502/US and distributor listings.
For detailed specifications, view the specific series: PARKER CM2 Check Valve, PARKER CM3 Check Valve, or PARKER CPOM Pilot Check Valve.
Suitable for machine tools, presses, and hydraulic systems requiring load-holding or pilot-controlled reverse flow.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER Manapak check valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.