PARKER CM3 Check Valve Series (NG10)
Overview:
HYRIG can supply the PARKER CM3 series and related hydraulic components. These Manapak sandwich check valves provide integral full-flow check function in specific ports for NG10 circuits.
| Parameter | Value |
|---|---|
| Mounting Standard | ISO 4401-05 (CETOP 5) |
| Mounting Bolt Pattern | 4 × M6 |
| Approx. Weight | 1.7 kg |
The PP/TT/AA/BB/DD prefix indicates the controlled port. The VHT suffix specifies 0.5 bar cracking pressure. All code positions must match when replacing.
Need to confirm the controlled port for an NG10 circuit? Contact HYRIG with your requirements.
Used for pilot-line isolation and leakage-free blocking in medium-flow hydraulic systems.
Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.
Specifications:
Contact Us:
For PARKER CM3 series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.