PARKER CM2 Check Valve Series | NG6 Manapak Sandwich

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the PARKER CM2 series. These are Manapak sandwich check valves for NG6 interfaces, available for P, T, A, B, or dual A&B port control.
Conatct For Details
DetailReview(0)Additional

PARKER CM2 Check Valve Series (NG6)

Overview:

HYRIG can supply the PARKER CM2 series and related hydraulic components. These Manapak sandwich check valves provide integral full-flow check function in specific ports, blocking reverse flow.

Dimensions (Text-Based)

ParameterValue
Mounting StandardISO 4401-03 (CETOP 3)
Mounting Bolt Pattern4 × M5
Approx. Weight0.7 kg

Cross-Reference & Replacement

The PP/TT/AA/BB/DD prefix indicates the controlled port. The VHT suffix specifies 0.5 bar cracking pressure and FPM seals. All code positions must match when replacing.

Selection Support

Need to confirm the controlled port or cracking pressure? Contact HYRIG with your circuit requirements, and we will confirm the correct CM2 model code.

Applications

Used for pilot-line isolation and leakage-free blocking in hydraulic systems.

Disclaimer: PARKER is a registered trademark of Parker Hannifin Corporation. HYRIG is an independent supplier of hydraulic components and is not affiliated with Parker Hannifin Corporation.

Specifications:

  • **CM2PPVHT**: Controlled Port P; Cracking Pressure 0.5 bar; Max Flow 60 L/min
  • CM2TTVHT: Controlled Port T; Cracking Pressure 0.5 bar; Max Flow 60 L/min
  • CM2AAVHT: Controlled Port A; Cracking Pressure 0.5 bar; Max Flow 60 L/min
  • CM2BBVHT: Controlled Port B; Cracking Pressure 0.5 bar; Max Flow 60 L/min
  • CM2DDVHT: Controlled Port A & B; Cracking Pressure 0.5 bar; Max Flow 60 L/min
  • CM2AAF: Controlled Port A; Cracking Pressure *Contact factory*; Max Flow 60 L/min
  • Valve Type: Sandwich check valve (direct-operated)
  • Size: NG6 (CETOP 3 / NFPA D03)
  • Maximum Operating Pressure: 350 bar (5000 psi)
  • Maximum Flow: 60 L/min (16 GPM) for most variants; up to 77 L/min at 3000 psi
  • Controlled Ports: PP (P), TT (T), AA (A), BB (B), DD (A&B), PT (P&T)
  • Cracking Pressure Codes: VHT = 0.5 bar (standard); other codes available
  • Seal Material: FPM (Viton) standard for VHT variants

Contact Us:

For PARKER CM2 series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit