High-efficiency OH2 overhung centrifugal pump for sulfuric acid, hydrochloric acid, nitric acid, alkaline solutions, and corrosive chemical media. Direct replacement for Sulzer, Goulds, Flowserve, KSB, and Rodelta models.
The PCO series acid pump is a horizontal, single-stage, single-suction, centerline-mounted overhung centrifugal pump, designed and manufactured according to API 610 OH2 and GB/T 5656 standards. It delivers outstanding corrosion resistance, stable long-term operation, high hydraulic efficiency, and easy maintenance.
Widely used in chemical, petrochemical, metallurgical, pharmaceutical, and environmental protection industries for handling:
Sulfuric acid, hydrochloric acid, nitric acid, phosphoric acid
Alkaline solutions, brine, and chemical slurries
Acidic wastewater, pickling solutions, and flue gas desulfurization (FGD) media
OH2 centerline-mounted design – Minimizes thermal distortion and vibration for continuous heavy-duty service
Back pull-out construction – Disassemble rotating element without removing piping or motor, reducing downtime
Optimized hydraulic model – High efficiency, low NPSH requirement, low radial force and noise
Multiple corrosion-resistant wetted materials – Choose from 304, 316L, duplex stainless steel, PTFE/F46 lining, Hastelloy, and more
Rigid shaft + heavy-duty bearings – Low shaft deflection extends mechanical seal and bearing life
Full model range – Covers flow rates from 3 to 2000 m³/h, heads from 8 to 125 m
| Parameter | Value |
|---|---|
| Flow Rate | 3 ~ 2000 m³/h |
| Head | 8 ~ 125 m |
| Speed | 1450 / 2900 r/min |
| Temperature Range | -20℃ ~ 200℃ |
| Nominal Diameter | DN25 ~ DN300 |
| Design Standard | API 610 OH2 |
| Model | Outlet DN (mm) | Flow (m³/h) | Head (m) | Speed (r/min) | Motor Power (kW) |
|---|---|---|---|---|---|
| PCO25-160 | 25 | 3 – 12.5 | 8 – 12.5 | 2900 | 1.5 |
| PCO40-200 | 40 | 6.3 – 25 | 12.5 – 20 | 2900 | 3 |
| PCO50-250 | 50 | 12.5 – 50 | 20 – 32 | 2900 | 5.5 |
| PCO80-315 | 80 | 50 – 200 | 32 – 50 | 2900 | 22 |
| PCO100-400 | 100 | 100 – 400 | 50 – 80 | 1450 | 55 |
| PCO150-500 | 150 | 300 – 800 | 80 – 125 | 1450 | 110 |
| PCO200-500 | 200 | 500 – 1200 | 80 – 125 | 1450 | 160 |
| PCO300-500 | 300 | 1000 – 2000 | 80 – 125 | 1450 | 250 |
Full model list available upon request – covers all DN25 to DN300 sizes.
Our PCO series OH2 acid pumps are dimensionally and performance-compatible drop-in replacements for leading API 610 chemical pumps, including:
Sulzer (OHH / PRE series)
Goulds (3700 series)
Flowserve (ERPN series)
KSB (RPH series)
Rodelta (HZC series)
Same installation dimensions. Same hydraulic performance. Superior corrosion resistance. Cost-effective and shorter delivery time.
Chemical processing – Acid transfer, circulation, waste acid treatment
Petrochemical & chemical fiber – Process fluid handling, corrosive media
Metallurgy & electroplating – Pickling solutions, acidic wastewater
Environmental protection – Flue gas desulfurization (FGD), acid neutralization
Pharmaceutical & food – Sanitary corrosion-resistant liquid transfer
Complete model range – Quick and accurate selection for any duty
API 610 OH2 compliance – High reliability and low lifecycle cost
Multiple material options – Tailored for strong acids, high temperatures, and abrasive conditions
Direct retrofit – Save procurement cost and reduce plant downtime
Customization available – High-temperature, high-pressure, or special alloy requirements
Acid Pump Model Selection Guide
Choose the right model in three steps:
Find your required flow and head in the table above.
Confirm operating temperature and acidity – select material (316L, Duplex, F46 lining, etc.).
Match the model with the motor power and speed. For off-table conditions, contact info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.