LT500/125 Pneumatic Clutch
Overview:
HYRIG can supply the LT500/125 pneumatic clutch range and its replacement parts. The LT500/125 is a common type air tube clutch used in mechanical power transmission systems, featuring a friction wheel diameter of 497 mm and an air tube working pressure of 0.7-0.8 MPa.
| Model | Limited Speed (rpm) | Rated Torque (N.m) | Working Pressure (MPa) | Friction Wheel Dia. D2 (mm) | Inlet Pipe Thread |
|---|---|---|---|---|---|
| LT500/125 | 1642-1877 | 6790-9114 | 0.7-0.8 | 497 | M20×1.5 |
Data source: Technical data table
For the complete range, see pneumatic clutch series models.
Suitable for mechanical power transmission systems requiring pneumatic clutch engagement and disengagement. For maintenance, refer to LT500/125 pneumatic clutch parts.
Specifications:
Contact Us:
For LT500/125 selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.