Pneumatic Clutch Series
Overview:
HYRIG can supply the pneumatic clutch series and its replacement parts. The pneumatic clutch is a power transmission component categorized into common type and ventilated type, with the main difference being whether an aluminum tile is installed.
| Model | Rated Speed (r/min) | Rated Torque (N.m) | Working Pressure (MPa) | Friction Wheel Dia. Φ1 (mm) | Rim Width H (mm) | Inlet Pipe Thread |
|---|---|---|---|---|---|---|
| 4CB200 | 1800 | 113 | 0.7±0.1 | 99 | 66 | NPT1/8-27 |
| 6CB200 | 1800 | 231 | 0.7±0.1 | 150 | 72.5 | NPT1/8-27 |
| 8CB250 | 1800 | 485 | 0.7±0.1 | 201 | 85 | NPT1/8-27 |
| 10CB300 | 1800 | 921 | 0.7±0.1 | 251 | 105 | NPT1/8-27 |
| 12CB350 | 1800 | 1500 | 0.7±0.1 | 302 | 112 | NPT1/8-27 |
| 14CB400 | 1800 | 2230 | 0.7±0.1 | 353 | 121 | NPT1/8-27 |
| 16CB500 | 1550 | 3980 | 0.7±0.1 | 403 | 168 | NPT3/8-18 |
| 18CB500 | 1400 | 4970 | 0.7±0.1 | 454 | 168 | NPT3/8-18 |
| 20CB500 | 1300 | 6060 | 0.7±0.1 | 505 | 168 | NPT3/8-18 |
| 20CB500 (Double row) | 1300 | 1210 | 0.7±0.1 | 505 | 346 | NPT3/8-18 |
| LT300/100 | 2332-2667 | 2025-2686 | 0.7-0.8 | 296 | 115 | M20×1.5 |
| LT400/125 | 1980-1765 | 6521-8430 | 0.6-1.0 | 400 | 168 | M20×1.5 |
| LT500/125 | 1642-1877 | 6790-9114 | 0.7-0.8 | 497 | 154 | M20×1.5 |
| LT600/125 | 1652-1547 | 9875-12998 | 0.7-0.9 | 597 | 154 | M20×1.5 |
| LT700/200 | 1315-1504 | 22060-28850 | 0.7-0.9 | 695 | 246 | M33×1.5 |
Data source: Technical data table
For maintenance, refer to pneumatic clutch series parts. For specific models, view LT500/125 or 8CB250.
Suitable for mechanical power transmission systems requiring pneumatic clutch engagement and disengagement under specified working pressures.
Specifications:
Contact Us:
For pneumatic clutch series selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.