Process Condensate Pump OH2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The OH2 process condensate pump is an API 610 Type OH2 horizontal overhung centrifugal pump designed for handling process condensate – including steam condensate, hydrocarbon/water mixtures, and light liquid hydrocarbons – in refineries, petrochemical plants, chemical units, and industrial facilities. Flow range 10-1,000 m³/h, head up to 200 m, temperature range -40°C to 250°C, design pressure up to 40 bar. Wetted parts in carbon steel, 12% chrome, or 316SS. Mechanical seal with API flush plans. Hydraulic efficiency ≥70%, MTBF ≥8000 hours. Reliable for continuous condensate removal and recovery.

Conatct For Details
DetailReview(0)Additional

The Process Condensate Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for handling process condensate streams in petroleum refineries, petrochemical complexes, chemical plants, and industrial processing units. It reliably pumps steam condensate, hydrocarbon/water mixtures, light condensable hydrocarbons, and other process condensates from heat exchangers, reboilers, condensate drums, knockout pots, and distillation overhead systems.

Key Performance Parameters (Typical for Process Condensate Service)

  • Flow range: 10 – 1,000 m³/h (customizable based on process condensate load)

  • Head range: Up to 200 m (approximately 655 ft)

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM

  • Power range: 5.5 – 315 kW (varies with flow, head, and fluid density)

Process Compatibility (Process Condensate Service)

  • Temperature range: -40°C to 250°C (-40°F to 482°F) – suitable for cold condensate (cryogenic) to high temperature steam condensate.

  • Design pressure: Up to 40 bar (580 psi) – compatible with condensate system pressures, including elevated pressure return loops.

  • Media handled: Steam condensate, hydrocarbon/water mixtures (e.g., naphtha/water, diesel/water), light hydrocarbon condensate (propane, butane, propylene), sour water, and chemical process condensates.

  • Wetted materials: Carbon steel (S-1) – standard for clean condensate; 12% chrome (S-5) for higher temperature/erosion resistance; 316 stainless steel (S-6) for corrosive or chloride‑containing condensate; duplex (S-8) for sour service (H₂S).

Reliability & Efficiency

  • Sealing system: Mechanical seal (single, double, or tandem) with API flush plans – typically Plan 11, 21, or 23 for hot condensate. Plan 52/53 recommended for hydrocarbon/water mixtures to prevent emissions.

  • Hydraulic efficiency: ≥70% at best efficiency point (BEP)

  • NPSHr: Low NPSH design – critical for condensate service where suction head may be limited (e.g., vacuum condensate or gravity drain from drums).

  • MTBF: ≥8000 hours – supports continuous 24/7 operation.

Mechanical Design (API 610 OH2 Features for Process Condensate Service)

  • Configuration: Single stage, overhung, horizontal, centerline mounted (for high temperature) or foot mounted (for lower temperature), radially split casing.

  • Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow)

  • Flange rating: Class 150, 300, or 600 RF (ANSI/ASME)

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life.

  • Bearing housing: Fan cooled (standard); water cooling optional for high temperature service (above 150°C).

  • Seal chamber: API 682 compliant, sized for cartridge mechanical seals (large bore recommended for high temperature).

  • Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.

  • Impeller: Closed radial, dynamically balanced, with renewable wear rings.

  • Wear rings: Renewable casing and impeller wear rings (hard coated options available) to maintain hydraulic efficiency.

Typical Applications (Process Condensate Service)

  • Steam condensate return systems – collecting and pumping condensate from steam traps and heat exchangers back to boiler feedwater or recovery

  • Distillation overhead condensate – pumping condensed overhead product from accumulators or reflux drums

  • Knockout drum condensate removal – transferring hydrocarbon/water mixtures from KO drums to slop or treatment

  • Hydrocarbon/water separator discharge – pumping separated water or hydrocarbon phase

  • Sour water stripper feed – moving sour condensate to stripper columns

  • Chemical process condensate – handling various organic/water condensates in chemical plants

Why Choose This OH2 Process Condensate Pump?

For process condensate handling across a wide range of temperatures, compositions, and system pressures, the OH2 pump delivers reliable, efficient, and maintainable service. Its API 610 heavy duty construction, flexible material selection, low NPSHr, and robust sealing options make it the industry standard for safe and continuous removal of process condensates in refineries, petrochemical plants, and chemical facilities.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, condensate composition (water only or hydrocarbon/water mixture), operating temperature, and suction conditions for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit