The Glycol Water Recirculation Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for continuous recirculation of glycol/water mixtures in industrial heating and cooling systems, freeze protection loops, gas dehydration units (TEG circulation), and chemical process applications. It reliably handles various glycol solutions including ethylene glycol (EG), propylene glycol (PG), and triethylene glycol (TEG) mixed with water.
Key Performance Parameters (Typical for Glycol/Water Recirculation)
Flow range: 10 – 800 m³/h (depending on system demand)
Head range: Up to 150 m (approximately 490 ft)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 5.5 – 250 kW (varies with flow, head, and glycol concentration/density)
Process Compatibility (Glycol/Water Service)
Temperature range: -30°C to 120°C (-22°F to 248°F) – suitable for chilled glycol (antifreeze) to hot glycol regeneration loops.
Design pressure: Up to 20 bar (290 psi) – typical for closed loop circulation systems.
Media handled: Ethylene glycol/water mixtures, propylene glycol/water, triethylene glycol (TEG), and other glycol-based heat transfer fluids.
Wetted materials: Carbon steel (S-1) – standard for non‑corrosive glycol; 316 stainless steel (S-6) recommended for higher purity or corrosion resistance; duplex (S-8) optional for aggressive service.
Reliability & Efficiency
Sealing system: Mechanical seal (single cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). For high temperature glycol (e.g., TEG regenerator), Plan 23 or double seal (Plan 52/53) may be used.
Hydraulic efficiency: ≥75% at best efficiency point (BEP) – optimized for continuous operation at moderate heads.
NPSHr: ≤4.5 m – low NPSH design for closed loop systems with limited suction head.
MTBF: ≥8000 hours – supports long-term continuous recirculation.
Mechanical Design (API 610 OH2 Features for Glycol/Water Service)
Configuration: Single stage, overhung, horizontal, foot mounted (for lower temperature) or centerline mounted (for high temperature TEG service), radially split casing.
Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow)
Flange rating: Class 150 or Class 300 RF (ANSI/ASME)
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life.
Bearing housing: Fan cooled (standard); water cooling optional for high temperature glycol applications.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals.
Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.
Impeller: Closed radial, dynamically balanced, with renewable wear rings.
Wear rings: Renewable casing and impeller wear rings to maintain hydraulic efficiency over pump life.
Typical Applications (Glycol/Water Recirculation)
HVAC chilled water loops – circulating glycol/water mixtures for freeze protection in cold climates
Industrial process cooling – glycol recirculation in reactors, heat exchangers, and condensers
Natural gas dehydration (TEG circulation) – circulating triethylene glycol in glycol regeneration units
Solar thermal systems – heat transfer fluid circulation
Food and beverage processing – propylene glycol recirculation (food grade)
Airport deicing fluid recirculation – ethylene glycol mixtures
Closed loop heating systems – hot glycol circulation for freeze prevention in pipelines
Why Choose This OH2 Glycol Water Recirculation Pump?
For glycol/water recirculation in industrial cooling, heating, or gas dehydration systems, this OH2 pump delivers reliable, energy‑efficient performance with API 610 heavy duty construction. Its wide hydraulic coverage, low NPSHr, and flexible material options make it the ideal choice for continuous glycol circulation, ensuring system reliability and freeze protection.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, glycol type (EG/PG/TEG), concentration, and operating temperature for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.