The Recovery Booster Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for recovery, recycle, and pressure boosting service in petroleum refineries, petrochemical plants, chemical processing units, and gas processing facilities. It reliably handles low pressure process streams, recovery fluids, recycle flows, and other hydrocarbon or chemical services requiring moderate pressure increase to reintegrate into the main process or transfer to downstream equipment.
Key Performance Parameters (Typical for Recovery Booster Service)
Flow range: 10 – 1,200 m³/h (customizable based on process demand)
Head range: Up to 250 m (approximately 820 ft)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM (based on duty point)
Power range: 7.5 – 355 kW (varies with flow, head, and fluid density)
Process Compatibility (Recovery & Booster Service)
Temperature range: -40°C to 260°C (-40°F to 500°F) – suitable for cold to high temperature recovery streams.
Design pressure: Up to 40 bar (580 psi) – compatible with typical booster discharge pressures.
Media handled: Hydrocarbons (light ends, naphtha, diesel, gas oil), recovered solvents, recycle gases (liquid phase), chemicals, water, amines, and other industrial fluids.
Wetted materials: Carbon steel (S-1) – standard; 12% chrome (S-5) for higher temperature/erosion; 316 stainless steel (S-6) for corrosion resistance; duplex (S-8) for sour service.
Reliability & Efficiency
Sealing system: Mechanical seal (single, double, or tandem) with API flush plans – typically Plan 11, 21, 23, 52, or 53 based on service conditions and environmental requirements.
Hydraulic efficiency: ≥72% at best efficiency point (BEP)
NPSHr: Low NPSH design – critical for booster applications where suction pressure may be low or near vapor pressure.
MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.
Mechanical Design (API 610 OH2 Features for Recovery Booster Service)
Configuration: Single stage, overhung, horizontal, centerline mounted (for high temperature) or foot mounted (for lower temperature), radially split casing.
Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow)
Flange rating: Class 150, 300, or 600 RF (ANSI/ASME) – based on design pressure.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor support: Rigid shaft with minimal deflection – extends mechanical seal and bearing life.
Bearing housing: Fan cooled (standard); water cooling optional for high temperature applications.
Seal chamber: API 682 compliant, sized for cartridge mechanical seals (large bore recommended for high temperature).
Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.
Impeller: Closed radial, dynamically balanced, with renewable wear rings.
Wear rings: Renewable casing and impeller wear rings (hard coated options) to maintain hydraulic efficiency.
Typical Applications (Recovery & Booster Service)
Recovery of vented hydrocarbons from flare systems or pressure relief headers
Boosting low pressure recycle streams back to reactor or fractionator feed
Transferring recovered solvents or chemicals from collection tanks to storage or processing
Boosting condensate from knockout drums to higher pressure systems
Recycling water or light hydrocarbons in heat exchanger loops
Feed boosting for downstream pumps or processes with insufficient suction pressure
Recovery of vapors condensed in recovery units
Why Choose This OH2 Recovery Booster Pump?
For recovery, recycle, and booster applications demanding reliable pressure increase of low pressure process streams, the OH2 pump delivers exceptional performance, high efficiency, and API 610 durability. Its robust construction, flexible material options, and low NPSH design make it the ideal choice for boosting recovered fluids back into the process, reducing waste and improving plant efficiency.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, fluid properties, inlet pressure, and operating temperature for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.