The Product Transfer Pump is an API 610 Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for transferring refined products and finished petrochemical liquids in refinery, tank farm, pipeline, and loading terminal applications. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
Typical services include gasoline, diesel, jet fuel (kerosene), naphtha, fuel oil, reformate, and various petrochemical finished products. The BB2 configuration features a radially split casing with double suction impeller providing inherent axial thrust balance and excellent low NPSH characteristics — ideal for suction lift conditions common in tank farm transfer. Double volute casing reduces radial hydraulic loads, extending bearing and seal life. Centerline mounting accommodates thermal expansion when handling warm products.
As a specialized China API 610 pump manufacturer, we produce BB2 product transfer pumps optimized for high efficiency, low operating cost, and reliable continuous duty in finished product logistics.
| Medium | Suitability |
|---|---|
| Gasoline (all grades) | Excellent – low NPSH design critical |
| Diesel / Gas oil | Excellent – high flow capability |
| Jet fuel (Jet A, JP-8) | Excellent – clean service, long life |
| Naphtha | Excellent – low viscosity hydrocarbon |
| Reformate | Excellent – stable service |
| Fuel oil (light/medium) | Good – requires appropriate seal |
| Petrochemical products (benzene, toluene, xylene, etc.) | Excellent – stainless steel optional |
| Parameter | Standard Range |
|---|---|
| Flow rate (Q) | 50 ~ 7,500 m³/h |
| Total head (H) | 20 ~ 400 m |
| Operating temperature | -80°C ~ +200°C |
| Design pressure | Up to 10 MPa (100 bar) |
| Speed | 1,450 / 2,980 / 3,600 rpm |
| Flange rating | ASME Class 150 / 300 / 600 |
| Casing | Radially split, double volute, centerline mounted |
| Impeller | Double suction enclosed, single stage (two stage optional) |
| Feature | Benefit for Finished Product Service |
|---|---|
| Double suction impeller | Inherent axial thrust balance; significantly reduces NPSH required – critical for tank farm suction lift |
| Double volute casing | Balances radial hydraulic loads; reduces vibration, extends bearing and seal life |
| Between‑bearings construction | Rigid shaft minimizes deflection; stable operation across flow range |
| Radially split casing | Top half removable for internal access without disturbing piping – simplifies maintenance |
| Centerline mounting | Accommodates thermal expansion; maintains alignment during temperature changes |
| Renewable wear rings | Replaceable; maintains efficiency over pump lifetime |
| API 682 seal chamber | Accepts single or tandem mechanical seals; Plan 11 (internal recirculation) typical |
| Heavy duty bearings | Angular contact thrust bearings; oil ring self‑lubricating |
| High efficiency hydraulics | Designed for continuous operation at BEP; reduces energy cost |
| Component | Standard Material (Hydrocarbon Service) | Upgrade Option |
|---|---|---|
| Casing | Carbon steel (WCB / A216) | 304SS / 316SS |
| Impeller | Carbon steel or 12% Cr steel | 304SS / 316SS |
| Shaft | AISI 4140 (chrome steel) | 17-4PH SS |
| Wear rings | Hardened 12% Cr | 316SS with Stellite facing |
| Bolting | A193 B7 | A193 B8M (316SS) |
| Gaskets | Spiral wound (SS/Graphite) | PTFE |
| Mechanical seal faces | Silicon carbide vs. carbon | Tungsten carbide |
| Area | Typical Service |
|---|---|
| Refinery product shipping | Transfer to pipeline, railcar, truck loading |
| Tank farm | Transfer from storage to loading rack or pipeline |
| Pipeline intermediate stations | Boosting finished products through long distance pipelines |
| Terminal offloading | Unloading from ship/barge to shore tanks |
| Petrochemical plant | Transfer of finished chemical products to storage |
Full API 610 11th Edition (ISO 13709) compliance
High efficiency hydraulics – reduces energy consumption
Low NPSH design – suitable for tank farm suction conditions
Competitive cost – 20–30% lower than Western brands
Lead time – 20–26 weeks for standard carbon steel
Complete testing – hydraulic performance, NPSH, mechanical run
Full documentation – performance curves, GA drawings, API data sheets
Spare parts – mechanical seals, bearings, wear rings stocked
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB2 – horizontal, radially split, between bearings, centerline mounted |
| Medium | Gasoline, diesel, jet fuel, naphtha, refined petrochemical products |
| Flow range | Up to 7,500 m³/h |
| Head range | Up to 400 m |
| Temperature | -80°C to +200°C |
| Pressure | Up to 10 MPa (100 bar) |
| Casing | Radially split, double volute |
| Impeller | Double suction enclosed, single stage |
| Materials | Carbon steel (standard); 304/316SS optional |
| Seals | API 682 Plan 11 (single mechanical seal) |
| Lubrication | Oil ring self‑lubricating |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom proposal for your finished product transfer pump (API 610 BB2) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.