The Concentration Feed Pump is an API 610 Type BB4 horizontal, radially split, ring section (segmental) multistage centrifugal pump specifically engineered for feeding process solutions to evaporators and concentration units in chemical and fertilizer plants. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
The BB4 configuration — horizontal, between bearings, single casing, radially split — is commonly known as a ring section pump, segmental pump, or tie rod pump-. It features multiple stages housed in a sectional casing held together by tie bolts, with impellers arranged in the same direction. Centerline mounting ensures uniform thermal expansion at elevated temperatures.
In concentration service, the pump transfers partially concentrated solution from evaporator bodies or storage vessels to the next evaporator stage or final concentrator. Typical duties include urea solution, ammonium nitrate, phosphoric acid, caustic soda, and other process liquors.
As a specialized China API 610 pump manufacturer, we produce BB4 concentration feed pumps optimized for high pressure, moderate temperature, and continuous evaporator feed service.-3
| Medium | Suitability |
|---|---|
| Urea solution (aqueous) up to 95% | Excellent — 304/316SS construction |
| Ammonium nitrate solution | Excellent — corrosion resistant alloys |
| Phosphoric acid | Good — with appropriate materials (316L/duplex) |
| Caustic soda (NaOH) | Excellent — 304SS adequate |
| Process liquors with solids | Limited — clean service only |
| Hydrocarbon fluids | Excellent — with carbon steel |
| Parameter | Range |
|---|---|
| Flow rate (Q) | 3 ~ 900 m³/h |
| Total head (H) | 50 ~ 2,200 m (up to 1800 m typical) |
| Operating temperature | -80°C ~ +210°C (up to 250°C with special design) |
| Design pressure | Up to 26~27 MPa (260~270 bar) |
| Speed | 1,450 / 2,980 rpm (50/60 Hz) |
| Flange rating | ASME Class 300 ~ Class 2500 RF |
| Feature | Benefit |
|---|---|
| Ring section (segmental) construction | Tie bolted casing, economical for high pressure applications, easy stage count adjustment |
| Radially split, single casing | Simplified maintenance, no casing distortion under pressure |
| Between bearings support | Rigid shaft, stable operation, reduced vibration |
| Centerline mounting | Uniform thermal expansion, prevents misalignment at elevated temperatures |
| Impellers arranged same direction | All impellers rotate same direction, simple hydraulic design |
| Stainless steel diffusers | Efficient pressure conversion, corrosion resistance |
| Renewable wear rings | Replaceable casing and impeller rings restore efficiency |
| API 682 seal chamber | Accommodates single/tandem/double mechanical seals, Plan 11/21/52 compatible |
| Axial thrust balancing system | Balance drum + balance disc combination fully balances axial forces, extending bearing life |
| Low NPSH first stage impeller | Single or double suction design improves cavitation performance |
| Component | Standard (Urea/Evaporator Service) | Upgrade Option |
|---|---|---|
| Casing / Stage casing | Carbon steel or 304SS | 316L SS / Duplex |
| Impellers | 304SS | 316L SS / Duplex 2205 |
| Shaft | AISI 4140 / 17-4PH SS | Duplex / Super Duplex |
| Diffusers | 304SS | 316L SS |
| Wear rings | Hardened 12% Cr | 316SS with Stellite facing |
| Balance drum/disc | 304SS with hard facing | 316SS with Stellite |
| Tie bolts | A193 B7 | A193 B8M (316SS) |
| Gaskets | PTFE / Spiral wound | FFKM (high temperature) |
| Industry | Typical Concentration Feed Service |
|---|---|
| Fertilizer / Urea | Urea solution to evaporator/prilling tower, ammonium nitrate concentration |
| Chemical processing | Caustic soda evaporator feed, phosphoric acid concentration |
| Petrochemical | Hydrocarbon condensate transfer |
| Power generation | Boiler feed water (high pressure) |
| Water treatment | Reverse osmosis feed (RO desalination) |
Step 1: Define Operating Conditions
Flow rate, total head required for evaporator elevation
Fluid temperature (typically 120~180°C for urea evaporator)
Urea concentration (30~95% depending on process stage)
NPSH available (often adequate from evaporator body)
Step 2: Select Number of Stages
Each stage generates 50~150 m head at 2950 rpm
For 300~1500 m total head, select 4~15 stages
Add or remove stage casings to adjust head after design
Step 3: Specify Seal System
Single mechanical seal with Plan 11 or 21 (standard for urea solution)
Tandem seal with Plan 52 recommended for zero emission service
Double seal with Plan 53B for highly corrosive or toxic fluids
Seal faces: Silicon carbide vs. carbon (standard)
Step 4: Specify Materials
304SS wetted parts adequate for urea solution service
316L SS recommended for higher corrosion resistance
Teflon/PTFE or EPDM gaskets for chemical compatibility
Step 5: Auxiliary Features
Water cooling on bearing housing required if fluid >120°C
Casing drain connections for cleaning and maintenance
Minimum flow recirculation (ARC valve) protects pump at low load
Low NPSH double suction first stage if required
Full API 610 11th Edition (ISO 13709) compliance
Proven BB4 ring section technology — economical high pressure multistage design
Optimal for urea evaporator and chemical concentration service
Flow range: 3~900 m³/h; Head range: 50~1800 m
Competitive cost — lower initial investment
Lead time — 20~30 weeks for standard materials
Factory testing — hydraulic performance, NPSH, mechanical run
Complete documentation — performance curves, GA drawings, API data sheets, material certifications
Spare parts — wear rings, mechanical seals, bearings stocked
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB4 — horizontal, ring section (segmental), radially split, between bearings |
| Medium | Urea solution, ammonium nitrate, concentration feed fluids |
| Flow range | 3 ~ 900 m³/h |
| Head range | 50 ~ 1,800 m |
| Stages | 4 ~ 15 (depending on total head) |
| Temperature | -80°C ~ +210°C |
| Pressure | Up to 27 MPa (270 bar) |
| Casing | Single casing, radially split, ring section, tie bolt construction |
| Impellers | Same direction, 304SS / 316L SS |
| Materials | Carbon steel / 304SS / 316L SS / Duplex |
| Seals | API 682 compliant Plan 11/21/52/53B |
| Lubrication | Oil ring / Forced oil (high power) |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom proposal for your concentration feed pump (API 610 BB4) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.