The Geothermal Circulation Pump is an API 610 Type BB1 horizontal, axially split, single stage, between‑bearings centrifugal pump specifically engineered for handling geothermal brine, heat transfer fluids, and hot water circulation in geothermal power plants and district heating systems. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
In geothermal applications, the BB1 pump recirculates geothermal fluid between production wells, heat exchangers, and injection wells. Binary cycle power plants (Organic Rankine Cycle / Kalina cycle) require reliable circulation of heat transfer fluid (typically 105°C to 185°C) or secondary working fluids such as pentane, isobutane, or ammonia. High temperature geothermal loops demand pumps with robust thermal management and corrosion resistance.
The BB1 configuration features a horizontally split casing (axial split) with double suction impeller providing inherent axial thrust balance and excellent low NPSH characteristics — ideal for suction conditions typical in geothermal heat exchangers. Between-bearings design ensures superior shaft rigidity. Foot or near-centerline mounting accommodates thermal expansion at elevated temperatures.
As a specialized China API 610 pump manufacturer, we produce BB1 geothermal circulation pumps optimized for high temperature service, corrosion resistance, and continuous duty.
| Medium | Suitability |
|---|---|
| Geothermal brine (geothermal water) | Good — with corrosion resistant alloys (316SS/duplex) |
| Hot water / Hot condensate up to 200°C | Excellent — chrome steel or stainless steel |
| Heat transfer oil (thermal oil) | Excellent — up to 350°C with appropriate seals |
| Secondary working fluids (isobutane, pentane, ammonia) | Excellent — for binary cycle power plants |
| Corrosive geothermal fluids (with H₂S, chlorides) | Requires duplex or super duplex |
| Parameter | Range |
|---|---|
| Flow rate (Q) | 120 ~ 20,000 m³/h |
| Total head (H) | 10 ~ 300 m |
| Operating temperature | -40°C ~ +205°C (up to 350°C for thermal oil) |
| Design pressure | Up to 11 MPa (110 bar) |
| Speed | 1,450 / 2,980 / 3,600 rpm |
| Flange rating | ASME Class 150 / 300 / 600 |
| Casing | Axially split (horizontal), double volute |
| Impeller | Double suction enclosed single stage |
| Feature | Benefit |
|---|---|
| Axially split casing | Horizontally split along centerline; upper half lifts off for full rotor access without disturbing piping; complete rotor replacement within 4 hours |
| Double suction impeller | Hydraulically balanced axial thrust; no thrust bearings required; excellent low NPSH (anti-cavitation) performance |
| Between-bearings support | Rigid shaft minimizes deflection; stable operation across flow range |
| Double volute casing | Automatically balances radial hydraulic forces; reduces shaft deflection and vibration |
| Foot or near-centerline mounted | Accommodates thermal expansion during geothermal cycling; prevents misalignment up to 205°C |
| Heavy duty shaft | Large diameter per API 610 requirements; minimizes deflection, extends seal and bearing life |
| Renewable wear rings | Replaceable casing and impeller rings restore efficiency |
| API 682 seal chamber | Accommodates single/tandem/double cartridge mechanical seals; Plan 11, 21, 23, 52, 53B |
| Heavy duty bearings | Angular contact thrust + cylindrical roller; oil ring self‑lubricating or forced oil |
| Cooling options | Fan cooling, water cooling (recommended for geothermal >120°C), finned housing |
| Inspection interval | 4 years between scheduled internal inspections |
| Component | Standard (Geothermal Service) | Upgrade Option |
|---|---|---|
| Casing | Carbon steel (WCB) or 304SS | 316L SS / Duplex 2205 |
| Impeller | 304SS / 12% Cr steel | 316L SS / Duplex |
| Shaft | AISI 4140 (chrome steel) | 17-4PH SS / Duplex |
| Wear rings | Hardened 12% Cr | 316SS with Stellite facing |
| Bolting | A193 B7 | A193 B8M (316SS) |
| Gaskets | Spiral wound (SS/Graphite) | PTFE / FFKM |
Note: Geothermal fluids often contain chlorides and H₂S. For aggressive geothermal brines, upgrade to duplex or super duplex stainless steel.
| Application | Description |
|---|---|
| Binary cycle circulation | Heat transfer fluid circulation between heat exchangers and turbine |
| District heating circulation | Geothermal hot water supply to district heating networks |
| Injection well boosting | Transfer of cooled geothermal brine to injection wells |
| Flash steam plant condensate return | Condensate recirculation in high temperature geothermal flash plants (requires chrome steel or high temp alloys) |
| Wellhead circulation | Loop circulation for well testing and production stabilization |
Full API 610 11th Edition (ISO 13709) compliance — global standard for heavy duty process pumps
Proven BB1 axially split design — thousands installed in power and industrial circulation worldwide
Single stage double suction — inherent axial balance, excellent low NPSH, lowest lifecycle cost
High temperature capability — up to 205°C standard; higher with special materials
Complete material range — carbon steel, 304/316SS, duplex, chrome steel, NACE compliance
Quick maintenance — split casing allows full access; 4‑hour rotor change without disturbing piping
Competitive cost — 20–30% lower than Western equivalents
Lead time — 20–28 weeks for standard carbon steel / 304SS configurations
Factory testing — hydraulic performance, mechanical run, vibration monitoring
Full documentation — performance curves, GA drawings, API datasheet, material certifications
Spare parts availability — seals, wear rings, bearings stocked for standard sizes
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB1 — axially split, single stage, between bearings |
| Medium | Geothermal brine, hot water, thermal oil, secondary working fluids |
| Flow range | 120 ~ 20,000 m³/h |
| Head range | 10 ~ 300 m |
| Temperature range | -40°C to +205°C (up to 350°C for thermal oil) |
| Pressure rating | Up to 11 MPa (110 bar) |
| Speed | Up to 3,600 rpm |
| Casing | Axially split (horizontal), double volute, foot or near-centerline mounted |
| Impeller | Double suction enclosed single stage |
| Impeller arrangement | Same direction — simple hydraulic design, inherent axial thrust balance |
| Configurations | Single stage (standard); two stage options for high head requirements |
| Materials | Carbon steel, 304SS, 316SS, duplex, chrome steel |
| Seals | API 682 compliant, Plan 11/21/23/52/53B |
| Lubrication | Oil ring self‑lubricating (standard); forced oil (high power) |
| Maintenance | Rotor accessible without disconnecting piping; 4‑year inspection interval |
| Certification | API 610 11th Edition / ISO 13709 / NACE on request |
For more information or a custom proposal for your geothermal circulation pump (API 610 BB1) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.