The Cooling Water Pump is an API 610 Type BB1 horizontal, axially split, single stage, between‑bearings centrifugal pump specifically engineered for circulating cooling water in power plants, industrial facilities, HVAC systems, and chemical plants. The pump fully complies with API 610 11th Edition and ISO 13709 standards.
In cooling water service, the pump circulates water from cooling towers, rivers, or seawater intakes through heat exchangers, condensers, and process coolers. The BB1 configuration features a horizontally split casing (axial split) with double suction impeller providing inherent axial thrust balance and excellent low NPSH characteristics — ideal for suction lift or low submergence conditions typical in cooling tower basins. Between-bearings design ensures superior shaft rigidity and smooth operation across the flow range.
As a specialized China API 610 pump manufacturer, we produce BB1 cooling water pumps optimized for high flow, low head, and continuous duty.
| Medium | Suitability |
|---|---|
| Fresh water / Cooling tower water | Excellent – standard construction |
| Raw water / River water | Good – with strainer and appropriate materials |
| Sea water | Excellent – with duplex or super duplex stainless steel |
| Process cooling water | Excellent – clean service |
| Brackish water | Good – with 316SS or duplex |
| Parameter | Range |
|---|---|
| Flow rate (Q) | 120 ~ 20,000 m³/h |
| Total head (H) | 10 ~ 250 m |
| Operating temperature | -20°C ~ +120°C |
| Design pressure | Up to 2.5 MPa (25 bar) |
| Speed | 1,450 / 2,980 / 3,600 rpm |
| Flange rating | ASME Class 150 / 300 |
| Casing | Axially split (horizontal), double volute |
| Impeller | Double suction enclosed single stage |
| Feature | Benefit |
|---|---|
| Axially split casing | Horizontally split along centerline; upper half lifts off for full rotor access without disturbing piping – minimizes maintenance downtime |
| Double suction impeller | Inherent axial thrust balance; eliminates thrust bearing; excellent low NPSH performance – critical for cooling tower suction |
| Between-bearings support | Rigid shaft minimizes deflection; stable, vibration-free operation across flow range |
| Double volute casing | Balances radial hydraulic forces; reduces shaft deflection and bearing loads |
| Centerline or foot mounting | Accommodates thermal expansion; prevents misalignment |
| Renewable wear rings | Replaceable; restores pump efficiency without replacing casing |
| API 682 seal chamber | Accepts single mechanical seal (Plan 11 standard) or tandem seals for zero emission |
| Heavy duty bearings | Angular contact + cylindrical roller; oil ring self‑lubricating |
| High efficiency hydraulics | Designed for continuous operation near BEP – reduces energy cost |
| Component | Fresh Water Service | Sea Water / Corrosive Service |
|---|---|---|
| Casing | Carbon steel (WCB) or Cast iron | 316L SS / Duplex 2205 / Super Duplex 2507 |
| Impeller | Carbon steel / 304SS | 316L SS / Duplex / Bronze |
| Shaft | AISI 4140 | 17-4PH SS / Duplex |
| Wear rings | Hardened 12% Cr | 316SS with Stellite / Silicon carbide |
| Bolting | A193 B7 | A193 B8M (316SS) |
| Gaskets | Spiral wound (SS/Graphite) | PTFE |
| Industry | Cooling Water Service |
|---|---|
| Power generation | Condenser cooling, auxiliary cooling tower circulation |
| Petrochemical / Refining | Process cooler circulation, cooling tower supply |
| Chemical plants | Reactor jacket cooling, condenser water |
| HVAC central plants | Chilled water / condenser water circulation |
| Steel mills | Process cooling, roll cooling |
| District cooling | Central plant circulation |
Full API 610 11th Edition (ISO 13709) compliance
High flow capacity – up to 20,000 m³/h
Double suction low NPSH design – suitable for cooling tower suction
High efficiency – reduces long term energy cost
Axially split casing – easy maintenance, 4‑hour rotor change without pipe disturbance
Competitive cost – 20–30% lower than Western brands
Lead time – 18–24 weeks for standard carbon steel
Material options – carbon steel, 304/316SS, duplex, bronze (seawater)
Factory testing – hydraulic performance, mechanical run, vibration monitoring
Complete documentation – performance curves, GA drawings, API datasheet, material certifications
Spare parts – seals, wear rings, bearings stocked
| Parameter | Specification |
|---|---|
| Pump Type | API 610 Type BB1 – axially split, single stage, between bearings |
| Medium | Fresh water, cooling tower water, sea water, process cooling water |
| Flow range | 120 ~ 20,000 m³/h |
| Head range | 10 ~ 250 m |
| Temperature range | -20°C to +120°C |
| Pressure | Up to 2.5 MPa (25 bar) |
| Casing | Axially split (horizontal), double volute |
| Impeller | Double suction enclosed single stage |
| Materials | Carbon steel / 304SS / 316SS / Duplex / Bronze |
| Seals | API 682 Plan 11 (single mechanical seal) |
| Lubrication | Oil ring self‑lubricating |
| Certification | API 610 11th Edition / ISO 13709 |
For more information or a custom proposal for your cooling water pump (API 610 BB1) application, please contact us at:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.