Pumparound Pump BBS 8×10×15M (API 610 Between‑Bearing Pump)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The BBS 8x10x15M is an API 610 between‑bearing, radial split centrifugal pump designed for pumparound service in refinery crude and vacuum distillation units. It handles high‑temperature distillates, waxy oils, and heavy diesel up to 380°C. Features 10” suction, 8” discharge, 15” maximum impeller diameter (M = modified). Typical flow 500‑1500 m³/h, head 60‑100 m. Two bearing supports provide high rigidity and low vibration. Split casing allows maintenance without disturbing piping. Forced or oil‑ring lubrication, high‑temp API 682 seal. Reliable for continuous refinery operation. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The BBS 8×10×15M is a heavy‑duty, between‑bearing, radially split centrifugal pump fully compliant with API 610 (ISO 13709). It is specifically engineered for pumparound service in refinery process units such as crude distillation, vacuum distillation, FCC, and coker plants. The pump extracts medium‑phase liquid from the middle section of a fractionation tower and returns it after heat exchange, enabling precise temperature control, heat recovery, and stable tower operation.

Model Breakdown

  • BBS = Between‑Bearing + Split casing (radial split, double support)

  • 10 = Suction diameter 10 inches (DN250)

  • 8 = Discharge diameter 8 inches (DN200)

  • 15M = Maximum impeller diameter 15 inches, where “M” indicates modified hydraulics for high‑flow, high‑temperature service

Key Operating Parameters (Typical)

  • Flow rate: 500 – 1500 m³/h (wide range, customized)

  • Head: 60 – 100 m (medium‑low head, high circulation)

  • Temperature: up to 380 °C (heavy gas oil, waxy distillate, heavy diesel)

  • Speed: 1450 or 2950 rpm (depending on driver)

  • Seal: API 682 high‑temperature cartridge mechanical seal

  • Bearing lubrication: forced oil or oil‑ring with cooling

Mechanical Features

  • Between‑bearing design – two bearings support the rotor, significantly reducing shaft deflection and vibration, ideal for continuous heavy‑duty operation.

  • Radial split casing – allows internal inspection and rotor removal without disconnecting suction/discharge piping, reducing maintenance downtime.

  • Centerline mounting – accommodates thermal expansion at high temperatures, preventing misalignment.

  • Cooling system – bearing housing with water or air cooling, plus optional forced oil lubrication for extended bearing life.

Materials (Refinery High‑Temperature Service)

  • Casing: Carbon steel or alloy steel (e.g., ASTM A216 WCB, A217 WC6)

  • Impeller & Shaft: Alloy steel with high‑temperature strength and wear resistance

  • Wear rings: Hardened materials to maintain efficiency

Applications

  • Middle pumparound loop in crude and vacuum distillation towers

  • Heat removal and temperature gradient stabilization in fractionators

  • Circulating heavy gas oil, waxy distillate, or heavy diesel

  • Continuous, long‑run refinery service where reliability is critical

Why Choose Hyrig for This Pump?
We provide API 610 BBS pumparound pumps that are fully interchangeable with major OEM designs. The BBS 8×10×15M delivers robust hydraulic performance, low life‑cycle cost, and safe handling of high‑temperature hydrocarbon fluids. Our engineering team can customise hydraulics and materials to match your exact tower duty.

Need a datasheet, drawing, or quotation? Contact us: info@hyrig.com – response within 24 hours.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit