Product Full Introduction – Sour Water Pump OHH 3x4x7.5-1 (API 610 OH2)
The OHH 3x4x7.5-1 is a horizontal overhung centrifugal pump designed to API 610 (ISO 13709) OH2 specification. It is purpose-built for sour water service, refinery wastewater, and corrosive hydrocarbon applications where hydrogen sulfide (H₂S) attack is a major concern.
Key Parameters
Suction: 4 inch (DN100) | Discharge: 3 inch (DN80)
Impeller diameter: 7.5 inches (single stage)
Flow rate: 30 – 60 m³/h | Head: 40 – 60 m
Power: 7.5 kW | Speed: 2950 rpm (50 Hz)
Seal: API 682 cartridge mechanical seal (sour service configuration)
Mechanical & Material Features
Centerline support and rigid shaft minimize deflection, ensuring long meantime between repairs (MTBR).
Finned bearing housing with fan cooling extends bearing life under high-temperature duty.
Wetted parts available in 316L stainless steel or duplex stainless steel for outstanding resistance to H₂S corrosion and chloride stress cracking.
Radial split casing allows easy maintenance without disturbing piping.
Applications
Sour water transfer and lift in refineries and petrochemical plants
Acidic media, amine service, crude oil desalting
Seawater boosting, sump transfer, tank farm duties
Why Choose Hyrig for This Pump?
We supply genuine alternative and retrofit pumps that fully comply with API 610 OH2 dimensional interchangeability. The OHH 3x4x7.5-1 delivers reliable performance, low life-cycle cost, and safe containment of hazardous sour fluids.
Need a quotation or technical datasheet? Contact us: info@hyrig.com – we reply within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.