GSG 80-260 High Pressure Lean Amine Pump – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The GSG 80-260 high pressure lean amine pump is a single-stage end-suction centrifugal pump designed for lean MDEA/DEA service in gas sweetening and refinery hydrotreating units. Flow up to 120 m³/h, head up to 160 m (1.6 MPa). Back pull-out design for easy maintenance, 316 stainless steel hydraulics, dual SiC mechanical seal. Efficiency up to 82%, 8000+ hours MTBF. EN 733 (DIN 24255) compliant.

Conatct For Details
DetailReview(0)Additional

The GSG 80-260 is a horizontal, single‑stage, end‑suction centrifugal pump purpose‑built for high‑pressure lean amine circulation in oil & gas, petrochemical, and natural gas sweetening plants. It reliably delivers regenerated lean MDEA/DEA from the regenerator bottom to the high‑pressure absorber, efficiently removing H₂S and CO₂ and preventing catalyst poisoning in hydrocrackers and hydrogenation units.

Key Technical Parameters

ParameterValue
ModelGSG 80-260
TypeHorizontal single‑stage end‑suction, back pull‑out
Outlet sizeDN80 (80 mm)
Impeller diameter260 mm
Flow range50 – 120 m³/h
Head range80 – 160 m (0.8 – 1.6 MPa)
Speed2900 rpm (50 Hz)
Efficiency75% – 82% (best efficiency point)
Shaft power18.5 – 45 kW
Motor power22 – 55 kW, IE3 explosion‑proof, IP55
Max working pressure2.5 MPa
Temperature range-20°C to 105°C
Wetted materials304/316 stainless steel (pump casing & impeller)
Seal typeDual mechanical seal (SiC/SiC), balanced

Design & Performance Features

  • High‑pressure hydraulic optimisation – 260 mm impeller delivers high head with low NPSHr and excellent anti‑cavitation performance.

  • Back pull‑out (back‑pull‑out) construction – full rotor can be withdrawn without disconnecting piping, slashing maintenance downtime and cost.

  • Corrosion‑resistant materials – all wetted parts in 304/316 stainless steel, suitable for lean amine with trace H₂S and mild corrosive fluids.

  • Dual mechanical seal – SiC/SiC, balanced design for high‑pressure service, ensuring zero fugitive emissions and compliance with chemical safety standards.

  • High reliability – heavy‑duty bearings, low vibration, designed for >8000 hours continuous trouble‑free operation.

  • Modular & standardised – Fully compliant with EN 733 (DIN 24255), excellent parts interchangeability, low spare parts inventory.

Typical Applications

  • Natural gas purification (amine sweetening units)

  • Refinery hydrotreating (HDS, HCU) and catalytic reforming

  • Sulfur recovery unit (SRU) tail gas treatment

  • High‑pressure CO₂ capture with MDEA solvents

Advantages Summary

The GSG 80-260 combines high head, corrosion resistance, easy back‑pull‑out maintenance, and long MTBF. It reduces energy consumption and unplanned downtime, making it the ideal choice for lean amine high‑pressure transfer – ensuring stable, efficient amine circulation with lower lifecycle cost.

Contact

For technical datasheets, quotations, or application support:
info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit