Product Overview
The HYRIG OH2 Lean Amine Pump is a heavy-duty, horizontal, single-stage overhung centrifugal pump, fully compliant with API 610 standards. Engineered for high flow, low to medium head lean amine circulation – including lean amine return from regenerator to absorber top or interstage recirculation – this pump handles up to 3000 m³/h at heads from 30 to 150 meters.
The OH2 configuration is well suited for large capacity amine loops where pressure differential is modest but reliability and ease of maintenance are critical. Centerline mounting accommodates thermal changes, and back pull-out design permits inline servicing.
Key Technical Parameters
Same as rich amine pump above.
Technical Focus for Lean Amine
| Consideration | HYRIG OH2 Solution |
|---|---|
| High flow, low head | Single-stage double volute |
| Cleaner than rich amine | 316L trim sufficient; carbon steel casing acceptable |
| Moderate corrosion potential | 316L impeller and wear rings |
| Continuous duty | Heavy duty bearings, API 682 seal |
Key Features
(Similar to rich amine, but with note that lean amine is typically less corrosive; material selection can be adjusted.)
Why HYRIG for Lean Amine?
HYRIG OH2 pumps provide dependable, high volume lean amine circulation with low maintenance requirements and long operating life.
Contact
For quotation: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.