Reformer Chlorination Injection Pumps – API 610 BB5, BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 reformer chlorination injection pumps are available in BB5 barrel, BB, OH, and VS designs, specifically engineered for precise high‑pressure injection of perchloroethylene (tetrachloroethylene) into catalytic reforming units for catalyst chlorination and acidification. BB5 barrel‑type multistage pumps are the preferred choice for extreme high‑pressure injection duties, delivering pressures up to 400 barg with double‑casing integrity. BB and OH configurations serve low‑flow, high‑head applications, while VS pumps handle low‑NPSH suction. Built with stainless steel, duplex, and corrosion‑resistant alloys. Fully API 610/ISO 13709 compliant for reliable, safe chlorination agent injection service.

Conatct For Details
DetailReview(0)Additional

Our API 610 reformer chlorination injection pumps are heavy‑duty centrifugal pumps engineered specifically for the precise, high‑pressure injection of perchloroethylene (tetrachloroethylene, C₂Cl₄) into catalytic reforming units for catalyst chlorination and acidification. In catalytic reforming, platinum‑based catalysts require controlled chlorination to maintain optimal acidity and activity. Perchloroethylene is injected at high pressures (typically up to 200 barg or higher) and relatively low flow rates into the feed or circulating gas stream, where it decomposes and chlorides the catalyst support. This is a demanding low‑flow, high‑head pumping application, requiring pumps with exceptional pressure containment, precise flow control, corrosion resistance to handle chlorinated hydrocarbons, and reliable performance under continuous or intermittent injection conditions. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for maximum safety, reliability, and longevity.

API 610 Classifications for Chlorination Agent Injection Duties

  • BB5 Barrel‑Type Pumps (Preferred for Extreme High‑Pressure Injection)
    For main high‑pressure perchloroethylene injection into catalytic reforming feed or gas streams, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration for pressures exceeding 100 barg. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature. BB5 pumps deliver heads up to 3,500 metres and flows typically ranging from 5 to 150 m³/h. The double‑casing design, centreline mounting, and radial split construction enable rapid warm‑up and accommodate thermal expansion.

  • BB – Between Bearings Pumps
    For medium‑pressure chlorination agent injection and booster duties, BB pumps provide superior rotor stability and long‑term reliability. BB3 (axially split, multistage) and BB4 (radially split, ring‑section) configurations are specified for flows up to 300 m³/h and heads up to 2,000 metres.

  • OH – Overhung Pumps (Preferred for Low‑Flow, High‑Head Services)
    For low‑flow, high‑head perchloroethylene injection applications – a characteristic of many chemical injection duties – OH pumps are often the optimal choice. OH6 (integrally geared, high‑speed) and OH2 (horizontal, centreline‑mounted) subtypes offer compact, space‑saving solutions. The Roto‑Jet RO‑FT API 610 pump, featuring a Pitot tube design, is specifically engineered for demanding low‑flow, high‑head services, achieving high heads in a single stage at low operating speeds. Features include:

    • Between‑bearings arrangement minimizing shaft deflection

    • No wear rings or close running clearances

    • Low NPSH3 without an inducer

    • Pulsation‑free flow over the entire head‑flow curve

    • API 682 cartridge seals

  • VS – Vertically Suspended Pumps
    VS pumps are used for low‑NPSH suction from perchloroethylene storage tanks or sumps. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems.

Key Performance & Design Features

  • Pressure Capability – Discharge pressures from 50 barg up to 450 barg, matching catalytic reforming unit pressures

  • Flow & Head – Capacities from 1 m³/h to 300 m³/h; multistage hydraulics generate heads up to 3,500 metres; OH6 designs achieve heads up to 1,500 metres at flows below 100 m³/h

  • Temperature Range – Engineered for perchloroethylene from ambient to 100°C, with appropriate material selection

  • Low‑Flow Capability – Specialised hydraulic designs (Pitot tube, high‑speed, and multistage configurations) for efficient low‑flow, high‑head operation

  • Materials – Wetted parts in stainless steels (316L, duplex, super duplex), 12% chromium steels, and corrosion‑resistant alloys to withstand chlorinated hydrocarbon corrosion. Full NACE MR0175/ISO 15156 compliance for sour service

  • Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for high‑pressure, toxic chemical injection service

  • Casing Integrity – BB5 barrel casing designed to ASME Section VIII; hydrostatically tested at 1.5x maximum working pressure

  • Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range

  • Bearing & Lubrication – Forced oil or oil mist lubrication with bearing temperature and vibration monitoring for predictive maintenance

  • NPSH Performance – Low NPSH3 designs available without inducers for demanding suction conditions

Typical Applications

  • Perchloroethylene injection for catalyst chlorination in catalytic reforming units

  • Chlorination agent injection into reformer feed or circulating gas streams

  • Chemical injection for catalyst acidification in refinery reforming processes

  • Low‑flow, high‑head chemical injection in refinery and petrochemical processes

  • Chlorinated hydrocarbon handling and injection systems

Industries Served

  • Oil refineries (catalytic reforming, aromatics production)

  • Petrochemicals (catalyst activation and chlorination)

  • Gas processing (condensate upgrading)

Why Choose Our Reformer Chlorination Injection Pumps?

With specialised expertise in high‑pressure chemical injection and full API 610 compliance, we design and manufacture reformer chlorination injection pumps that deliver best‑in‑class reliability, safety, and precision. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, chlorinated hydrocarbon material evaluation, and seal system design – to ensure seamless integration into your catalytic reforming unit. All materials are supplied with complete traceability and certified test reports.

Contact Us

For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:

info@hyrig.com

Partner with us to maintain your reformer catalyst activity with reliable, code‑compliant API 610 chlorination agent injection pump technology.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit