Reformer Hydrogen Compressor Knockout Drum Bottom Pumps – API 610 BB5, BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 reformer hydrogen compressor knockout drum bottom pumps are available in BB5 barrel, BB, OH, and VS designs, specifically engineered for the reliable recovery and transfer of C6‑C9 aromatic liquids from the second‑stage suction knockout drum of hydrogen compressors in catalytic reforming units. BB5 barrel‑type multistage pumps are the preferred choice for high‑pressure aromatic liquid recovery, delivering pressures up to 200 barg with double‑casing integrity. BB pumps provide superior rotor stability for high‑capacity transfer, while OH pumps serve auxiliary applications. VS pumps handle low‑NPSH suction. Built with stainless steel, duplex, and NACE‑compliant alloys. Fully API 610/ISO 13709 compliant for reliable, safe aromatic liquid recovery.

Conatct For Details
DetailReview(0)Additional

Our API 610 reformer hydrogen compressor knockout drum bottom pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable recovery and transfer of C6‑C9 aromatic liquids from the second‑stage suction knockout drum of hydrogen compressors in catalytic reforming units. In catalytic reforming, hydrogen‑rich recycle gas is compressed in multi‑stage compressors. The knockout drum at the compressor suction removes condensed liquid hydrocarbons – primarily C6‑C9 aromatics (benzene, toluene, xylene, and ethylbenzene) along with light paraffins – that would otherwise cause damage to the compressor internals. These aromatic liquids are valuable feedstocks for petrochemical production and must be recovered and transferred to downstream processing or storage. The liquid is characterised by moderate volatility, low viscosity, elevated temperatures (up to 100‑150°C), and often contains trace sulfur compounds and hydrogen. Pumps for this service demand robust construction, reliable sealing, and resistance to aromatic hydrocarbon corrosion. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, safe, and efficient operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with the BB5 barrel‑type pump often preferred for higher pressure recovery duties.

API 610 Classifications for Knockout Drum Bottom Duties

  • BB5 Barrel‑Type Pumps (Preferred for High‑Pressure Recovery)
    For high‑pressure aromatic liquid recovery from knockout drums, the BB5 subtype (barrel‑type, double‑casing, multistage) is the preferred configuration for pressures exceeding 50 barg. The inner casing contains multistage impellers, while the heavy‑walled outer barrel provides absolute pressure containment – a critical safety feature. BB5 pumps deliver heads up to 2,000 metres and flows up to 500 m³/h. The double‑casing design and centreline mounting accommodate thermal expansion.

  • BB – Between Bearings Pumps
    For high‑capacity aromatic liquid transfer at moderate pressures, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) and BB3 (axially split, multistage) configurations are specified for medium‑pressure recovery duties where barrel‑type construction is not required.

  • OH – Overhung Pumps
    In knockout drum systems, OH pumps are typically employed for auxiliary transfer or smaller recovery applications where pressures are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for smaller‑scale recovery services.

  • VS – Vertically Suspended Pumps
    VS pumps are used for low‑NPSH suction from knockout drums and sumps. VS1 (vertical turbine) and VS6 (vertical can/barrel) types are utilised where suction conditions are challenging and floor space is limited.

Key Performance & Design Features

  • Pressure Capability – Discharge pressures from 10 barg up to 200 barg, matching knockout drum system requirements.

  • Flow & Head – Capacities from 10 m³/h to 800 m³/h; multistage hydraulics generate heads up to 2,500 metres.

  • Temperature Range – Engineered for aromatic liquids from ambient to 150°C (302°F), with appropriate material selection.

  • NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve low NPSH requirements.

  • Materials – Wetted parts in low‑temperature carbon steel, stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys to withstand aromatic hydrocarbon corrosion. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Casing Integrity – BB5 barrel casing designed to ASME Section VIII or equivalent codes, hydrostatically tested at 1.5x maximum working pressure.

  • Sealing – API 682 dual mechanical seals with Plan 53A/B/C or Plan 72/75/76 seal support systems for volatile hydrocarbon service.

  • Advanced Balancing – Hydraulic balance drums or discs with independent leakage lines to neutralise axial thrust, coupled with heavy‑duty thrust bearings.

  • Rotor Dynamics – Rigorous API 684 analysis ensures lateral and torsional critical speeds are well above the operating range.

  • Bearing & Lubrication – Forced oil lubrication systems with bearing temperature/vibration transmitters for continuous condition monitoring.

Typical Applications

  • Aromatic liquid recovery from reformer hydrogen compressor suction knockout drums

  • Transfer from multi‑stage compressor interstage knockouts

  • C6‑C9 aromatic recovery to storage or downstream processing

  • Reformate liquid recovery from compressor suction drums

  • Aromatic hydrocarbon transfer in catalytic reforming units

Industries Served

  • Oil refineries (catalytic reforming, aromatics production)

  • Petrochemicals (benzene, toluene, xylene production)

  • Gas processing (condensate upgrading)

Why Choose Our Reformer Knockout Drum Bottom Pumps?

With specialised expertise in refinery hydrocarbon handling and full API 610 compliance, we design and manufacture reformer hydrogen compressor knockout drum bottom pumps that deliver best‑in‑class safety, reliability, and efficiency. Every pump undergoes rigorous hydrostatic testing at 1.5x maximum working pressure, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, magnetic particle, dye penetrant) with full documentation to meet the most stringent owner‑operator specifications. We provide full engineering support – including API 684 rotor dynamics analysis, NPSH margin calculations, and seal system design – to ensure seamless integration into your catalytic reforming unit. All materials are supplied with complete traceability and certified test reports.

Contact Us

For technical datasheets, API 684 analysis reports, or a project‑specific quotation, please contact us at:

info@hyrig.com

Partner with us to reliably recover valuable aromatic liquids from your reformer compressor knockout drums.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit