REXROTH MG20G Throttle Valve
Overview:
HYRIG can supply the REXROTH MG20G and related hydraulic components. The MG20G is an inline throttle valve that restricts flow in both directions, allowing actuator speed adjustment in either direction.
The MG20G throttles flow in both directions. The throttling gap is formed between the housing and an adjustable sleeve. Rotating the sleeve changes the gap cross-section steplessly.
If one direction must flow freely (e.g., for a fast return stroke), the MK series (throttle check valve) should be used instead. The MG series is for circuits requiring resistance in both directions.
Used in inline hydraulic piping. For related components, view REXROTH Flow Control Valves.
Need to confirm whether MG (bidirectional) or MK (one-way) is correct for your circuit? Describe your actuator's motion requirements, and HYRIG will advise.
Suitable for speed control in hydraulic systems where a compact inline valve is preferred over a sandwich-mounted solution.
Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.
Specifications:
Contact Us:
For REXROTH MG20G selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.