REXROTH MK25G Throttle Check Valve
Overview:
HYRIG can supply the REXROTH MK25G and related hydraulic components. The MK25G is an inline throttle check valve that restricts flow in one direction and opens freely in the reverse direction.
The MK25G throttles flow in one direction. In the reverse direction, the pressure lifts the poppet off its seat, allowing the fluid to pass through unthrottled with a 0.5 bar cracking pressure.
If throttling is required in both directions, the MG series should be used. MK is specifically for circuits where one direction must be restricted and the reverse must flow freely.
Used in inline hydraulic piping. For related components, view REXROTH Flow Control Valves.
Need to confirm the 0.5 bar cracking pressure is suitable for your return line? Contact HYRIG with your system parameters, and we will verify.
Suitable for controlling actuator speed in one direction while allowing rapid return in the other, common in machine tools and lifting equipment.
Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.
Specifications:
Contact Us:
For REXROTH MK25G selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.