REXROTH SV & SL Pilot Check Valve Series
Overview:
HYRIG can supply the REXROTH SV and SL series and related hydraulic components. These subplate-mounted pilot check valves are used for leakage-free blocking in high-flow circuits, with the SV and SL variants differing in pilot oil drain configuration.
| Model Code | Size | Pilot Drain | Connection | Decompression | Max Flow |
|---|---|---|---|---|---|
| SV10PA1-4X/ | NG10 | Internal | Subplate | With | 550 L/min |
| SL10PA1-4X/ | NG10 | External | Subplate | With | 550 L/min |
| SV20PA1-4X/ | NG20 | Internal | Subplate | With | 550 L/min |
| SL20PA1-4X/ | NG20 | External | Subplate | With | 550 L/min |
| SV30PA1-4X/ | NG32 | Internal | Subplate | With | 550 L/min |
| SL30PA1-4X/ | NG32 | External | Subplate | With | 550 L/min |
Data source: REXROTH catalog RE 21468.
For the NG20 versions, view REXROTH SV20PA1-4X/ (internal drain) and REXROTH SL20PA1-4X/ (external drain).
| Parameter | NG10 | NG20 | NG32 |
|---|---|---|---|
| Mounting Standard | ISO 5781 | ISO 5781 | ISO 5781 |
| Connection | Subplate | Subplate | Subplate |
SV vs SL: SV has internal pilot oil drain; SL has external pilot oil drain. P vs G: P = subplate mounting; G = threaded connection. A vs B: A = with decompression feature; B = without. All three code positions must match when replacing.
Need to confirm whether internal (SV) or external (SL) pilot drain is correct for your circuit? Contact HYRIG with your system schematic or requirements.
Used in high-flow hydraulic systems for load-holding, pilot-line isolation, and leakage-free blocking, where subplate mounting is preferred.
Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.
Specifications:
Contact Us:
For REXROTH SV/SL series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.