REXROTH Z2S Pilot Check Valve Series | NG6, NG10, NG16

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the REXROTH Z2S series. These are pilot-operated check valves in sandwich plate design, available in NG6, NG10, and NG16, with selectable cracking pressures and channel-specific blocking.
Conatct For Details
DetailReview(0)Additional

REXROTH Z2S Pilot Check Valve Series

Overview:

HYRIG can supply the REXROTH Z2S series and related hydraulic components. These sandwich-mounted pilot-operated check valves allow free flow in one direction and blocked flow in the reverse direction, which can be released by pilot pressure.

Key Specifications & Model Comparison

Model CodeSizeBlocking ChannelCracking PressureMax Flow
Z2S6-1-6X/NG6A&B1.5 bar60 L/min
Z2S6A-*-6X/NG6A1.5–10 bar60 L/min
Z2S6B-*-6X/NG6B1.5–10 bar60 L/min
Z2S10-1-3X/NG10A&B1.5 bar120 L/min
Z2S16-1-5X/NG16A&B1.5 bar300 L/min

Data source: REXROTH catalog and distributor listings.

For the NG6 standard A&B blocking with 1.5 bar cracking pressure, view REXROTH Z2S6-1-6X/.

Note: For Z2S16A--5X and Z2S16B--5X, the asterisk represents the cracking pressure code (1/2/3/4).

Dimensions (Text-Based)

ParameterNG6NG10NG16
Mounting StandardISO 4401-03ISO 4401-05ISO 4401-07
Mounting Bolt Pattern4 × M54 × M64 × M10
Approx. Weight1.2 kg2.8 kg5.5 kg

Cross-Reference & Replacement

The Z2S series requires matching both the blocking channel (A/B/A&B) and cracking pressure code (1/2/3/4). The component series (6X/3X/5X) indicates the design generation, with unchanged installation dimensions within each series.

Selection Support

Not sure which channel to block or which cracking pressure is correct for your pilot circuit? Contact HYRIG with your system parameters, and we will confirm the Z2S model code.

Applications

Used for load-holding, pilot-line isolation, and leakage-free blocking in hydraulic systems, particularly where a pilot signal is available to release the check valve. For the full range, view REXROTH Check Valves.

Disclaimer: REXROTH is a registered trademark of Bosch Rexroth AG. HYRIG is an independent supplier of hydraulic components and is not affiliated with Bosch Rexroth AG.

Specifications:

  • Valve Type: Pilot-operated check valve (sandwich plate)
  • Sizes: NG6 (6X), NG10 (3X), NG16 (5X)
  • Maximum Operating Pressure: 315 bar
  • Maximum Flow: NG6: 60 L/min; NG10: 120 L/min; NG16: 300 L/min
  • Cracking Pressure Codes: 1 (1.5 bar), 2 (3 bar), 3 (6 bar), 4 (10 bar)
  • Blocking Channels: A, B, or A&B

Contact Us:

For REXROTH Z2S series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit