RG Petro RGF800 Mud Pump | 800 HP & 1000 psi Max Pressure
Overview:
HYRIG can supply the RG Petro RGF800 mud pump and its spare parts. The RGF800 is a triplex single-acting piston mud pump designed for oilfield drilling, featuring an 800 HP rated power, a compact steel plate welded frame, and a maximum working pressure of 1000 psi. It conforms to API standards for reliable mud circulation.
| Model | Rated Power (hp) | Max Pressure (psi) | Liner Diameter (in) | Stroke (in) | Gear Ratio | Overall Size (ft) |
|---|---|---|---|---|---|---|
| RGF500 | 500 | 1000 | 4 1/2 - 6 1/4 | 9.84 | 4.268 | 16.8 x 8.2 x 7.4 |
| RGF800 | 800 | 1000 | 4 1/2 - 6 1/4 | 11.81 | 4.185 | 19.7 x 9.2 x 8.5 |
| RGF1000 | 1000 | 1000 | 5 - 6 3/4 | 11.81 | 4.207 | 21.3 x 9.8 x 8.9 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Overall Length | 19.7 ft |
| Overall Width | 9.2 ft |
| Overall Height | 8.5 ft |
| Suction Flange | 12 in |
| Discharge Flange | 5 1/8 in |
The RGF800 mud pump adopts a horizontal, triplex single-acting piston design. Power is transmitted from the diesel engine through a transmission box to the pinion shaft, driving the crankshaft. The crankshaft converts rotary motion into the reciprocating motion of the crossheads and pistons. The hydraulic end features a high-strength forged steel fluid cylinder and is equipped with a suction damper and discharge air bag to smooth pressure fluctuations.
When replacing a mud pump, the critical parameters to verify are the required flow rate (GPM) and pressure (PSI), which dictate the liner size. The RGF800 is compatible with standard L-style fluid ends. For higher flow demands, the RGF1000 provides an increased power rating. The footprint and drive shaft connection must be verified with the existing power unit.
Not sure which mud pump model or liner size fits your well depth and drilling program? Tell us your required flow rate and pressure, and our engineers will provide the correct configuration. For smaller operations, view RGF500 Mud Pump. For higher power, explore RGF1000 Mud Pump.
Suitable for oil and gas drilling rigs, workover operations, and well cementing. Designed to circulate drilling fluid (mud) under high pressure to cool the drill bit and carry cuttings to the surface.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
HYRIG provides a full range of replacement parts for the RGF series mud pumps, including wear components such as pistons, liners, valves, and seats. Whether you need a complete fluid end module or specific maintenance kits, we have you covered. Please see our RGF Mud Pump Parts for detailed part number lists.
Specifications:
FAQ:
Contact Us:
For RG Petro RGF800 mud pump selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.