RG Petro Rotary Table Bushings | Master & Kelly Bushings
Overview:
HYRIG provides a full range of replacement parts for RG Petro rotary tables, including master bushings, kelly bushings, and inserts. These bushings are designed to fit ZP series tables such as the ZP175, ZP275, and ZP375, ensuring proper torque transmission and safe drilling operations.
Bushings are matched to the rotary table opening diameter. The outer dimension of the master bushing matches the table's internal bore, while the inner dimension is selected based on the drill pipe or casing size (inserts).
The master bushing fits into the rotary table and transfers torque to the kelly bushing or drill pipe slips. The split type allows for installation around the drill string without breaking the connection. The kelly bushing engages with the kelly to drive the rotation.
These bushings are compatible with the following RG Petro rotary tables:
To select the correct bushing, verify your rotary table model, the drive type (square or 4-pin), and the outer diameter of your drill pipe or casing. Tell us your specifications, and we will provide the matching part number.
Used in the rotating system of drilling rigs to connect the rotary table to the drill string, enabling torque transmission while allowing the drill string to move vertically.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
| Part Name | Associated Model | Qty |
|---|---|---|
| Master Bushing Body | ZP275 / ZP375 | 1 |
| Kelly Bushing | ZP Series | 1 |
| Insert (1#, 2#, 3#) | ZP Series | 1 Set |
Qty as per parts list; verify against original drawing.
Specifications:
FAQ:
Contact Us:
For RG Petro rotary table bushings selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.