| Parameter | Value |
|---|---|
| Series | 106 Series |
| Tool Type | Roller Centralizer |
| Body Material | Rigid steel |
| Roller Material | Heat-treated alloy steel |
| Blade Type | Straight or Spiral |
| Casing Size Range | 5-1/2" to 13-3/8" (confirm size) |
Data source: Technical data table.
The 106 Series is dimensioned to match the casing size and the specific open hole ID. The rollers increase the effective running OD slightly compared to standard rigid centralizers.
| Casing Size | Max OD (Roller) | Overall Length | Blade Configuration |
|---|---|---|---|
| Contact for exact size | Matched to hole ID | Standard | Straight / Spiral |
Specific dimensions are confirmed against the selected casing specification at order.
In long horizontal sections, sliding friction between the casing and the wellbore can prevent the string from reaching total depth (TD).
Why upgrade to the 106 Roller Centralizer?
For standard vertical wells, see the Casing Centralizer Series.
Disclaimer: This equipment is designed for downhole casing operations. Ensure strict compliance with local safety standards and verify centralizer sizing and torque requirements against your well program prior to installation.
Need help calculating the drag reduction or the number of roller centralizers required? Send us your well trajectory and casing specs, and our engineers will provide a placement plan.
Q: Do roller centralizers reduce torque?
A: Yes. The alloy steel rollers convert sliding friction into rolling friction, significantly reducing both torque and drag during casing running and rotation.
Q: Can I rotate the casing with these centralizers installed?
A: Yes. The 106 Series is specifically designed to allow for rotation and reciprocation in highly deviated and horizontal wells.
Q: Do the rollers wear out?
A: The rollers are made from heat-treated alloy steel for high durability. However, they should be inspected after each run and replaced if significant wear is observed.
Q: What is the typical lead time?
A: Standard lead time is 3-5 weeks depending on the casing size and quantity.
For 106 Series Roller Centralizer selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.