104 Series Rigid Centralizer | Maximum Standoff

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the 104 Series Rigid Centralizer and its spare parts. Constructed as a one-piece solid body, this rigid centralizer is designed to provide maximum standoff from the borehole and impro
Conatct For Details
DetailReview(0)Additional

Key Facts

  • Type: Rigid Centralizer
  • Construction: One-piece solid body
  • Blade Types: Straight or Spiral
  • Material Options: Cast steel or aluminum alloy
  • Key Benefit: Maximum standoff, improves cement flow
  • Application: Gauge holes, cased hole applications

104 Series Specifications

ParameterValue
Series104 Series
Tool TypeRigid Centralizer
ConstructionOne-piece body
Blade DesignStraight or Spiral
MaterialCast steel / Aluminum alloy
Casing Size Range5-1/2" to 20" (confirm size)

Data source: Technical data table.

Dimensions

The 104 Series is matched to the casing size. Because it is rigid, the OD must be carefully selected to pass through any restrictions in the wellbore.

Casing SizeMax ODOverall LengthBlade Configuration
Contact for exact sizeMatched to hole IDStandardStraight / Spiral

Specific dimensions are confirmed against the selected casing specification at order.

Structure / Working Principle

The 104 Series is designed for applications where maximum standoff is required.

  • One-Piece Construction: The body is machined as a single piece, providing greater strength and durability than welded designs.
  • Blade Design: The straight or spiral blades provide a continuous contact surface with the wellbore. Spiral blades help to promote turbulent flow around the casing, improving mud removal and cement placement.
  • Installation: Rigid centralizers are typically held in place by stop collars or set screws.

Cross-Reference & Replacement

When should you choose the 104 Rigid Centralizer over a bow spring?

  1. Gauge Hole: Rigid centralizers are ideal in gauge or cased holes where there are no tight spots that would require the flexibility of a bow spring.
  2. Maximum Standoff: If you need near 100% standoff to ensure uniform cement coverage, the rigid design is the best choice.
  3. Cased Hole: Often used in cased hole applications where bow springs might hang up.
  4. Material Choice: Choose aluminum alloy if you need to drill out the centralizer later.

For flexible options in tight holes, see the Casing Centralizer Series.

Applications

  • Primary Cementing: Achieving maximum standoff for zonal isolation.
  • Cased Hole Applications: Where the wellbore is already cased and rigid support is needed.
  • Gauge Open Holes: Where the risk of hanging up is low.

Disclaimer: This equipment is designed for downhole casing operations. Ensure strict compliance with local safety standards and verify centralizer sizing and hole clearance against your well program prior to installation.

Selection Support

Need help choosing between straight and spiral blades, or confirming the correct OD for your hole size? Send us your well plan, and we will recommend the optimal configuration.

Frequently Asked Questions

Q: What is the difference between a rigid and a bow spring centralizer?
A: Rigid centralizers have solid blades that provide maximum standoff but do not flex. Bow spring centralizers have flexible bows that compress against the wellbore, making them better for tight spots.

Q: Why choose spiral blades over straight blades?
A: Spiral blades help to direct fluid flow around the casing, which improves mud displacement and cement placement.

Q: How is the rigid centralizer attached to the casing?
A: It is typically secured using stop collars or set screws.

Q: What is the typical lead time?
A: Standard lead time is 3-4 weeks depending on the size and material.

Contact

For 104 Series Rigid Centralizer selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit