| Series | Type | Installation Method | Key Feature |
|---|---|---|---|
| 200 | Pin Type | Hinged with locking pin | Firmly wedges into position |
| 201 | Bolt Type | Cross-bolt design | Quick and easy installation |
| 202 | Set Screw Type | Solid ring with set screws | Excellent gripping force for high axial loads |
Data source: Technical data table.
Stop collars are manufactured to match the specific casing OD.
| Casing Size Range | Types Available | Material |
|---|---|---|
| 2-7/8" to 20" | Pin, Bolt, Set Screw | High-strength steel |
Specific dimensions are confirmed against the selected casing specification at order.
Stop collars are installed on the casing above and below a centralizer to prevent it from sliding down the hole.
Selecting the right stop collar:
Disclaimer: This equipment is designed for downhole casing operations. Ensure strict compliance with local safety standards and verify stop collar sizing and load capacity against your well program prior to installation.
Need help determining how many stop collars you need or which type is best for your well? Send us your centralizer plan, and we will provide the matching accessories.
Q: How many stop collars do I need per centralizer?
A: Typically, two stop collars are used per centralizer (one above and one below). However, in some applications, one may be sufficient. Confirm with your casing design.
Q: What is the strongest stop collar type?
A: The 202 Set Screw Type is designed to withstand the highest axial loads.
Q: Are installation tools required?
A: The 201 Bolt Type can be installed with standard wrenches. The 200 Pin Type requires a hammer to drive the pin. The 202 Set Screw requires an Allen wrench.
Q: What is the typical lead time?
A: Standard lead time is 2-3 weeks.
For stop collar series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.