Part 640204230 is a SandMaster Magnum I Pump, 6x5x11, Grease, HA-C w/B2B Dbl. Seal, Mechanical Seal, Hard Iron. HYRIG provides this aftermarket replacement for Mission Magnum pumps. Manufactured in China. Contact info@hyrig.com for a quote. These pumps serve drilling fluid circulation, desander/desilter feed, and abrasive slurry transfer in solids control and mining systems.
Data source: Product catalog and pump selection guide
| Parameter | Value |
|---|---|
| Part No. | 640204230 |
| Model | SandMaster Magnum I |
| Configuration | SandMaster Magnum I Pump, 6x5x11, Grease, HA-C w/B2B Dbl. Seal, Mechanical Seal, Hard Iron |
| Frame Size | 6x5X1 |
| Lubrication | Grease-lubricated |
| Seal Type | Mechanical seal |
| Material | Hard Iron |
| Pump Series | SandMaster Magnum I / Mission Magnum |
| Category | Solid Control Equipment |
The SandMaster Magnum I is a horizontal centrifugal pump engineered for abrasive and corrosive slurry service. Its impeller converts driver power into kinetic energy; the casing volute then converts that energy into pressure head, moving drilling fluid, process water, or tailings through the system. Grease- or oil-lubricated bearing frames and a range of seal options (mechanical seal, packing, or flush-port configurations) let the pump be matched to site conditions.
640204230 and the frame size.Tell us your flow, head, fluid density, and solids content, and our engineers will confirm the correct frame and seal configuration.
Disclaimer: Ensure strict compliance with local safety standards and verify engineering drawings prior to installation.
Q1: Is this pump supplied as a complete unit or bare shaft?
A: HYRIG can supply SandMaster Magnum I pumps as complete units or as bare-shaft assemblies. Please confirm your requirement when requesting a quote.
Q2: Are spare parts interchangeable with Mission Magnum?
A: HYRIG supplies aftermarket replacement SandMaster Magnum I pumps and spare parts dimensionally compatible with the Mission Magnum range.
For 640204230 pump sourcing, contact HYRIG: info@hyrig.com HYRIG is an industrial equipment supplier providing solids control equipment, pumps, and spare parts to mining and oil & gas operators worldwide.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.