HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 132492 is a ram shaft seal assembly designed for 13-5/8" 10M Type 75 SL BOPs, sealing the reciprocating ram shaft against wellbore pressure.
| Parameter | Detail |
|---|---|
| Part Number | 132492 |
| Component Type | Ram Shaft Seal Assembly |
| Equipment Type | Shaffer Type 75 SL Ram BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 10,000 psi |
| Material | NBR (Nitrile Rubber) |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Seal Type | Ram Shaft Seal |
| Assembly Position | Around the ram operating shaft |
| Weight | Not specified; confirm with supplier |
The ram shaft seal assembly is installed around the ram operating shaft. It provides a dynamic seal as the shaft moves in and out to open or close the rams. This prevents wellbore fluids from leaking out of the BOP body along the shaft.
When replacing the 132492 seal assembly, verify the part number against your equipment manual. It is recommended to inspect the door gasket and ram packers at the same time.
Related Components:
Not sure if this seal fits your BOP? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.
Suitable for Shaffer Type 75 SL ram BOPs (13-5/8" 10M) during ram shaft maintenance or major overhauls.
HYRIG provides replacement ram shaft seal assemblies and related soft goods for Shaffer Type 75 SL BOPs.
What is the purpose of the ram shaft seal?
It seals the moving shaft that actuates the rams, preventing wellbore pressure from escaping.
When should the ram shaft seal be replaced?
It should be replaced during major overhauls, or whenever a leak is detected at the shaft.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 132492 ram shaft seal assembly. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.