HYRIG can supply the Shaffer Type 75 SL BOP seal range and its spare parts. The Shaffer 30108 is an O-ring designed for 13-5/8" 10M Type 75 SL BOP cylinders, providing a critical seal against wellbore pressure.
| Parameter | Detail |
|---|---|
| Part Number | 30108 |
| Component Type | O-Ring (Cylinder) |
| Equipment Type | Shaffer Type 75 SL Ram BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 10,000 psi |
| Material | NBR (Nitrile Rubber) |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Seal Type | O-Ring |
| Assembly Position | Cylinder |
| Weight | Not specified; confirm with supplier |
The 30108 O-ring sits in a gland within the BOP cylinder assembly. When pressure is applied, it deforms to seal the gap between mating metal parts, preventing fluid leakage.
When replacing the 30108 O-ring, verify the part number against your equipment manual.
Related Components:
Not sure if this O-ring fits your BOP? Provide your BOP model and serial number. HYRIG will confirm the correct Shaffer part.
Suitable for Shaffer Type 75 SL ram BOPs (13-5/8" 10M) during maintenance of the cylinder assembly.
HYRIG provides replacement O-rings and seals for Shaffer Type 75 SL BOPs.
What material is this O-ring made of?
It is made of NBR (Nitrile Rubber) for standard service. HNBR is available for H2S or high-temp.
When should the O-ring be replaced?
It should be replaced whenever the cylinder is opened or during a major overhaul to prevent leaks.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Shaffer 30108 O-ring. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.