HYRIG can supply the Shaffer Gate Valves and spare parts. Shaffer gate valves are available in three basic models: Type B (handwheel), Type DB (hydraulic remote), and Type HB (hydraulic subsea), covering bore sizes from 2 1/16 in to 4 1/16 in and working pressures from 5,000 to 15,000 psi.
| Model | Operation | Bore Sizes | Working Pressure | Typical Application |
|---|---|---|---|---|
| Type B | Handwheel | 2 1/16 in - 4 1/16 in | 5,000 / 10,000 / 15,000 psi | Choke and kill manifold, isolation |
| Type DB | Hydraulic remote | 2 1/16 in - 4 1/16 in | 5,000 / 10,000 / 15,000 psi | Remote-operated manifolds |
| Type HB | Hydraulic subsea | 2 1/16 in - 4 1/16 in | 5,000 / 10,000 / 15,000 psi | Subsea BOP stack choke/kill lines |
Data source: Technical data table.
| Model | Bore Size | Working Pressure | End Connection |
|---|---|---|---|
| Type B | 2 1/16 in | 5,000 / 10,000 / 15,000 psi | Flanged, Studded, Hubbed |
| Type B | 3 1/8 in | 5,000 / 10,000 / 15,000 psi | Flanged, Studded, Hubbed |
| Type B | 4 1/16 in | 5,000 / 10,000 / 15,000 psi | Flanged, Studded, Hubbed |
| Type DB | Same as Type B | Same as Type B | Same as Type B |
| Type HB | Same as Type B | Same as Type B | Same as Type B |
For detailed dimensions (A, B, C, D, E, F) by size and pressure, contact HYRIG with your valve specifications.
Type B valves use a one-piece slab gate that seals fluids from either direction, with the seal always against the downstream seat and upstream pressure in the body cavity. This lowers handwheel torque. Type DB valves mount a hydraulic operator on a Type B body, allowing remote operation without welding. Type HB valves are designed for subsea applications with spring-return fail-safe closure and pressure-balanced tail rod. All models feature elastomeric seals, hardened and precision-ground gates and seats, and grease-filled body cavities to resist foreign materials.
When replacing or selecting Shaffer gate valves, verify:
Shaffer gate valves are suitable for choke and kill manifold service, isolation valves on BOP stacks, and subsea BOP stack choke and kill lines. They are available for H2S service, low-temperature service, and high-temperature service up to 350°F.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for Shaffer Gate Valves, including gates, seats, stem packing, tail rod packing, bonnet bolts, and hydraulic operator seals. Key wear components include:
Contact HYRIG with the valve model, bore size, and pressure rating for a specific parts quotation.
Q: What is the difference between Type B, DB, and HB? A: Type B is handwheel-operated; Type DB is hydraulic remote-operated; Type HB is hydraulic subsea with spring-return fail-safe.
Q: What is the maximum working pressure? A: 15,000 psi.
Q: Are H2S trim valves available? A: Yes, all models are available with H2S trim meeting API 6A and NACE.
Q: Can the valve be repaired in the field? A: Yes, no special tools are required and parts are interchangeable.
Q: What is the lead time? A: Contact HYRIG for current availability.
Need help selecting the right gate valve for your manifold or subsea stack? Tell us your bore size, pressure, and operation requirements, and HYRIG engineers will confirm the correct model. Explore related products: Shaffer BOP Control Systems or Shaffer Choke and Kill Manifolds.
For Shaffer Gate Valves selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.