HYRIG can supply the Shaffer Type 79 Rotating BOP and its spare parts. The Shaffer Type 79 is a versatile rotating wellhead that seals tightly around kelly, drill pipe, drill collar, tubing or casing, designed for drilling in areas susceptible to kicks or blowouts.
| Parameter | Value |
|---|---|
| API Bottom Flange Size | 11 in - 3,000 psi; 11 in - 5,000 psi; 11 in - 10,000 psi; 13 5/8 in - 3,000 psi; 13 5/8 in - 5,000 psi; 13 5/8 in - 10,000 psi |
| Side Outlet Flange Size | 7 1/16 in - 3,000 psi; 9 in - 3,000 psi |
| Trim | Standard and Internal H2S |
| Maximum Stripping Pressure | 500 psi |
| Rotating Speed | 200 RPM |
Data source: Technical data table.
| Parameter | Value |
|---|---|
| Overall Height | Minimum 44 in |
| Weight | 12,500 lb |
| Bore Size | 11 in |
The Type 79 rotating BOP uses a rotating sleeve and stripper rubber attached to a kelly drive assembly. During drilling, the stripper rubber rotates with the drill string, while the kelly slides through the rubber, providing a seal. The quick-release bonnet allows fast switching between rotating assembly, stationary pipe stripper, and bell nipple extension. Reliable seals encircle the rotating sleeve, which turns smoothly in double roller bearings.
When selecting a Type 79 RBOP, verify:
The Shaffer Type 79 Rotating BOP is suitable for drilling in areas susceptible to kicks or blowouts, drilling under pressure, drilling with reverse circulation, and circulating with gas or air. It allows drilling with well bore pressure up to 500 psi and stripping pipe into or out of the hole at pressures up to 500 psi.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for the Shaffer Type 79 Rotating BOP, including stripper rubbers, rotating sleeves, bearings, lip-type seals, and quick-release bonnet components. Key wear components include:
Contact HYRIG with the RBOP serial number and configuration for a specific parts quotation.
Q: What is the maximum stripping pressure? A: 500 psi.
Q: What is the maximum rotating speed? A: 200 RPM.
Q: Can it be used for underbalanced drilling? A: Yes, it is designed for drilling under pressure and with gas or air.
Q: Is H2S trim available? A: Yes, standard and internal H2S trim are available.
Q: What is the lead time? A: Contact HYRIG for current availability.
Need a rotating BOP for underbalanced drilling? Tell us your pressure, flange, and trim requirements, and HYRIG engineers will confirm the correct Type 79 configuration. Explore related products: Shaffer BOP Control Systems or Shaffer Spherical BOP series.
For Shaffer Type 79 Rotating BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.