HYRIG can supply the Shaffer Wedge Cover Spherical BOP series and its spare parts. The Shaffer Wedge Cover Spherical BOP is a large-bore, high-pressure annular preventer using locking segments and a locking ring instead of bolted covers. It is available in Single and Dual configurations for working pressures from 1,000 to 10,000 psi.
| Working Pressure | Bore Sizes | Seal Ring | Element Weight | Piston Weight |
|---|---|---|---|---|
| 10,000 psi | 18 3/4 in, 13 5/8 in, 11 in | BX-164 / BX-159 / BX-158 | 1,525 / 675 / 525 lb | 4,625 / 2,650 / 1,950 lb |
| 5,000 psi | 21 1/4 in, 18 3/4 in, 16 3/4 in | BX-165 / BX-163 / BX-162 | 1,450 / 1,250 / 825 lb | 4,500 / 3,400 / 2,250 lb |
| 3,000 psi | 20 3/4 in, 13 5/8 in, 11 in | R-74 / RX-57 / RX-53 | 950 / 550 / 325 lb | 2,485 / 1,225 / 950 lb |
| 2,000 psi | 21 1/4 in | RX-73 | 950 lb | 2,485 lb |
| 1,000 psi | 30 in | R-95 | 2,875 lb | 5,025 lb |
| Bore Size | Element Weight | Piston Weight | Overall Height (Studded) | Total Weight (Studded) |
|---|---|---|---|---|
| 21 1/4 in | 1,450 lb (x4) | 4,500 lb (x4) | 98 1/16 in | 88,300 lb |
| 18 3/4 in | 1,250 lb (x4) | 3,400 lb (x4) | 90 in | 68,300 lb |
| 16 3/4 in | 825 lb (x4) | 2,250 lb (x4) | 78 7/8 in | 47,100 lb |
Data source: Technical data table and parts list.
| Dimension | 10,000 psi (18 3/4 in) | 5,000 psi (21 1/4 in) | 3,000 psi (20 3/4 in) |
|---|---|---|---|
| A (Outside Diameter) | - | 54 1/8 in | 54 1/8 in |
| B (Bore) | 18 3/4 in | 21 1/4 in | 20 3/4 in |
| Height (Flanged) | - | 48 7/16 in | 48 7/16 in |
| Dimension | 21 1/4 in | 18 3/4 in | 16 3/4 in |
|---|---|---|---|
| A | 71 in | 66 1/4 in | 60 in |
| B | 66 7/8 in | 62 1/4 in | 56 1/4 in |
| Height (Studded) | 98 1/16 in | 90 in | 78 7/8 in |
| Height (Flanged) | 108 1/16 in | 99 in | 87 3/16 in |
For full dimensions by connection type, contact HYRIG with your stack configuration.
The Wedge Cover Spherical BOP uses five major parts: upper housing, lower housing, sealing element, adapter ring, and piston. Unlike bolted-cover models, the upper housing is secured by locking segments and a locking ring. Hydraulic pressure moves the piston to compress the sealing element. The spherical element seals on pipe, casing, or open hole and allows stripping. Steel segments molded into the element prevent excessive extrusion under high pressure. The Dual Wedge Cover model incorporates two sealing elements, adapter rings, and pistons in one housing; each operates independently, and the dual unit is up to 20% shorter than two singles stacked.
When replacing an existing Wedge Cover Spherical BOP, verify:
For older Shaffer models or other brands, send nameplate data to HYRIG.
The Shaffer Wedge Cover Spherical BOP is suitable for large-bore, high-pressure drilling operations where space is limited. The Dual model is used when two Spherical BOPs are required in the stack, saving height and weight. It seals on drill pipe, casing, kelly, or open hole, and supports stripping operations.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for the Shaffer Wedge Cover Spherical BOP, including sealing elements (Nitrile or Natural), seal kits, adapter rings, pistons, locking segments, and locking rings. Key wear components include:
| Part | Part Number Example | Notes |
|---|---|---|
| Sealing Element Nitrile (Blue) | 155295 / 152693 / 152373 | Confirm by bore size and pressure |
| Sealing Element Natural (Red) | 155294 / 152694 / 152374 | Low-temperature service |
| Seal Kit | 155566 / 155045 / 155168 | Optional; not standard accessory |
| Locking Ring | 156130 / 152700 / 152352 | Wedge cover specific |
| Locking Segment Set | 156128 / 156953 / 152355 | Qty per BOP |
Part numbers are examples for specific sizes; confirm against your BOP serial number and parts list before ordering. For the complete parts list, contact HYRIG with your BOP nameplate data.
Q: What is the difference between Single and Dual Wedge Cover? A: Single has one sealing element; Dual has two independent sealing elements in one housing, saving stack height.
Q: What is the maximum working pressure? A: 10,000 psi for selected bore sizes; 5,000 psi for larger bores.
Q: Can the sealing element be changed in the field? A: Yes, the upper housing lifts off for access. The adapter ring protects the piston and hydraulic chamber during element change.
Q: Is H2S trim available? A: Internal H2S trim is standard; full environmental H2S trim is available.
Q: What is the lead time? A: Varies by configuration. Contact HYRIG for a quotation and delivery schedule.
Not sure whether Single or Dual Wedge Cover fits your stack? Tell us your bore size, pressure rating, and height constraints, and HYRIG engineers will confirm the configuration and spare parts. Explore related Spherical BOPs: Shaffer Bolted Cover Spherical BOP series.
For Shaffer Wedge Cover Spherical BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.