HYRIG can supply the Shaffer Chasovoy Ram BOP and its spare parts. The Shaffer Chasovoy is a lightweight, compact ram blowout preventer designed for well servicing, workover, fracking, and low-pressure drilling, available in manual or hydraulic operation.
| Parameter | Single | Double |
|---|---|---|
| Working Pressure | 5,000 psi (345 bar) | 5,000 psi (345 bar) |
| Test Pressure | 10,000 psi (690 bar) | 10,000 psi (690 bar) |
| Max Torque to Close | 735 ft-lbs | 735 ft-lbs |
| Operating Pressure | 3,000 psi (207 bar) | 3,000 psi (207 bar) |
| Ratio | 8.47:1 | 8.47:1 |
| Volume of Fluid | 0.6 gal (2.27 L) | 0.6 gal (2.27 L) |
| Piston Stroke | 4.062 in (103.2 mm) | 4.062 in (103.2 mm) |
Data source: Technical data table.
| Dimension | Single (Flange x Flange) | Double (Flange x Flange) |
|---|---|---|
| Overall Height (less studs) | 24.63 in (625.6 mm) | 33.88 in (860.6 mm) |
| Overall Length (Bonnets Closed) | 64.50 in (1,638.3 mm) | 64.50 in (1,638.3 mm) |
| Overall Length (Ram Change) | 80.75 in (2,051.0 mm) | 80.75 in (2,051.0 mm) |
| Overall Width | 20.62 in (523.7 mm) | 20.62 in (523.7 mm) |
| Opening Through Preventer | 7.062 in (179.4 mm) | 7.062 in (179.4 mm) |
| Approximate Weight | 1,600 lb (726 kg) | 2,800 lb (1,270 kg) |
The Chasovoy can be operated manually or hydraulically. In manual mode, turning a single drive shaft clockwise moves the active piston inward, displacing fluid to the close side of the slave piston to close both rams simultaneously. Turning counterclockwise opens the rams. To convert to hydraulic operation, disengage the drive shaft from the active piston and connect the accumulator unit to the open and close ports.
When replacing an existing Chasovoy BOP or selecting a new one, verify:
The Shaffer Chasovoy Ram BOP is ideal for workover, well servicing, fracking, and low-pressure drilling operations where a lightweight, compact, and easily transportable BOP is required. It can be operated manually in remote locations without hydraulic power.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for the Shaffer Chasovoy Ram BOP, including ram assemblies, ram rubbers, lip-type ram shaft seals, hydraulic piston seals, and operator body bolts. Key wear components include:
Contact HYRIG with the BOP serial number and configuration for a specific parts quotation.
Q: What is the maximum working pressure? A: 5,000 psi (345 bar).
Q: Can the Chasovoy be operated without hydraulic power? A: Yes, it features a unique manual operation mode using a single drive shaft.
Q: Can it be converted from manual to hydraulic? A: Yes, the conversion can be done in the field.
Q: What is the maximum torque to close and seal the rams manually? A: 735 ft-lbs.
Q: What is the lead time? A: Contact HYRIG for current availability.
Need a lightweight BOP for workover or fracking? Tell us your pressure requirements and power availability, and HYRIG engineers will confirm the correct Chasovoy configuration. Explore related ram BOP series: Shaffer LWS Ram BOP or Shaffer SL/SLX Ram BOP.
For Shaffer Chasovoy Ram BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.