HYRIG can supply the Shaffer LWS Ram BOP series and its spare parts. The Shaffer LWS is a time-tested ram blowout preventer designed for demanding pressure control requirements, available in working pressures from 2,000 to 10,000 psi. LWS models have been the most popular Shaffer ram preventers for over 20 years.
| Parameter | 10,000 psi | 5,000 psi | 3,000 psi | 2,000 psi |
|---|---|---|---|---|
| Bore Sizes | 7 1/16 to 11 in | 4 1/16 to 11 in | 7 1/16 to 20 3/4 in | 21 1/4 in |
| Piston Sizes | 14 in / 6 in | 8 1/2 in / 6 in | 10 in / 14 in / 8 1/2 in | 10 in / 14 in |
| Max Ram Size | 5 9/16 in | 8 5/8 in | 16 in | 16 in |
| Closing Ratio | 10.63 | 16.00 | 5.57 | 5.45 |
Data source: Technical data table.
| Configuration | 10,000 psi (7 1/16 in) | 5,000 psi (11 in) | 3,000 psi (20 3/4 in) |
|---|---|---|---|
| H (Single, Studded) | 23 in | 30 in | 23 1/8 in |
| H (Double, Studded) | 42 in | 46 in | 35 3/8 in |
| K (Single, Studded) | 15 1/4 in | 17 1/4 in | 15 1/4 in |
| K (Double, Studded) | 6 1/8 in | 12 1/8 in | 6 1/8 in |
| Weight (Single, Studded) | 6,130 lb | 6,000 lb | 7,810 lb |
For full dimensions by bore size and connection type, contact HYRIG with your stack configuration.
LWS ram BOPs use a robust body design with external hydraulic manifold pipes on most sizes. Rams are easily replaced by sliding horizontally onto the ram shaft (except 4 1/16 in 10K, which mounts from above). Poslock operators lock the rams automatically when closed; manual-lock operators are furnished on all BOPs not equipped with Poslock. Secondary ram shaft seals allow injection of plastic packing if the primary seal fails.
When replacing an existing LWS BOP, verify:
LWS rams can often interchange with newer models depending on the ram shaft design. Send nameplate data to HYRIG for confirmation.
The Shaffer LWS Ram BOP is suitable for land and offshore drilling operations, including routine drilling, stripping, and emergency well control. It is compatible with H2S service and can be equipped with shear rams for pipe cutting.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for the Shaffer LWS Ram BOP, including ram assemblies, piston seals, ram shaft seals, door seals, and wear rings. Key wear components include:
Contact HYRIG with the BOP serial number and ram configuration for a specific parts quotation.
Q: What is the maximum working pressure? A: 10,000 psi.
Q: What is the difference between LWS and SL/SLX? A: LWS is an older, proven design with external manifolds on most sizes; SL/SLX features flat doors and internal manifolds.
Q: Can rams be changed with pipe in the hole? A: Yes.
Q: Is H2S trim available? A: Yes, standard internal H2S trim with max ram hardness Rc22.
Q: What is the lead time? A: Varies by configuration. Contact HYRIG for a quotation.
Not sure if LWS or SL/SLX fits your rig? Tell us your pressure rating and stack requirements, and HYRIG engineers will confirm the best model. Explore related ram BOP series: Shaffer SL/SLX Ram BOP or Shaffer NXT Ram BOP.
For Shaffer LWS Ram BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.