HYRIG can supply the Shaffer SL/SLX Ram BOP series and its spare parts. The Shaffer SL/SLX is a field-proven ram blowout preventer designed for high-pressure, critical service, deep land drilling, and subsea operations, available in working pressures from 5,000 to 15,000 psi.
| Parameter | 15,000 psi | 10,000 psi | 5,000 psi | 3,000 psi |
|---|---|---|---|---|
| Bore Sizes | 7 1/16 to 18 3/4 in | 7 1/16 to 18 3/4 in | 7 1/16 to 16 3/4 in | 13 5/8 in |
| Piston Sizes | 14 in | 14 in / 10 in | 14 in / 10 in | 10 in |
| Max Ram Size | 13.375 in | 13.375 in | 13.375 in | - |
| Locking Options | Ultralock II, Poslock, Manual | Ultralock II, Poslock, Manual | Ultralock II, Poslock, Manual | Poslock, Manual |
Data source: Technical data table.
| Configuration | 15,000 psi | 10,000 psi | 5,000 psi |
|---|---|---|---|
| H (Single, Studded) | 41 in | 38 1/2 in | 25 in |
| H (Double, Studded) | 59 5/8 in | 58 1/8 in | 42 7/8 in |
| H (Triple, Studded) | - | 73 1/4 in | - |
| K (Double, Studded) | 13 1/2 in | 13 1/8 in | 6 1/8 in |
| M (Double, Studded) | - | 13 1/8 in | - |
For full dimensions by bore size and connection type, contact HYRIG with your stack configuration.
SL/SLX ram BOPs use flat doors for easy ram changes. To change rams, apply opening hydraulic pressure, vent pressure, remove door cap screws, and swing the door open. No closing pressure is needed to clear the door. SLX models feature a pressure-energized door seal cartridge that reduces door bolt torque. Internal H2S trim is standard. Poslock operators lock the rams automatically when closed, eliminating a second hydraulic function. Manual-lock and Poslock pistons are interchangeable on the same door.
When replacing an existing SL/SLX BOP, verify:
The SLX no-weld cavity is an available option on SLX and retrofit on some SL sizes. For older Shaffer models or other brands, send nameplate data to HYRIG.
The Shaffer SL/SLX Ram BOP is suitable for high-pressure, critical service operations, deep land drilling, and subsea service. It seals around drill pipe, closes on open hole, and can be equipped with shear rams for emergency disconnect. Full environmental H2S trim is available for sour service.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
HYRIG provides replacement parts for the Shaffer SL/SLX Ram BOP, including ram assemblies, door seals, piston seals, wear rings, and shear rams. Key wear components include:
Contact HYRIG with the BOP serial number and ram configuration for a specific parts quotation.
Q: What is the maximum working pressure? A: 15,000 psi.
Q: What is the difference between SL and SLX? A: SLX features a pressure-energized door seal and no-weld cavity option; SL uses a standard door seal. Both share the same ram cavity and operating principle.
Q: Can rams be changed with pipe in the hole? A: Yes, the flat door design allows ram changes without breaking hydraulic connections.
Q: Is H2S trim available? A: Internal H2S trim is standard. Full environmental H2S trim is available.
Q: What is the lead time? A: Varies by configuration. Contact HYRIG for a quotation and delivery schedule.
Not sure which SL/SLX configuration fits your stack? Tell us your pressure rating, bore size, and cavity requirements, and HYRIG engineers will confirm the model and ram options. Explore related ram BOP series: Shaffer LWS Ram BOP or Shaffer NXT Ram BOP.
For Shaffer SL/SLX Ram BOP selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.