HYRIG can supply the Shaffer NXT UltraTemp Rams and replacement ram components for high-temperature 18 3/4 in NXT Ram BOPs. UltraTemp rams are designed for service up to 350°F (177°C).
| Pipe O.D. | 5,000 psi 18 3/4 NXT | 10,000 psi 18 3/4 NXT/SLXT | 15,000 psi 18 3/4 NXT/SLXT |
|---|---|---|---|
| 3 1/2 in (89 mm) | U/T-D | U/T-D | U/T-D |
| 4 in (102 mm) | U/T-D | U/T-D | U/T-D |
| 4 1/2 in (114 mm) | U/T-D | U/T-D | U/T-D |
| 5 in (127 mm) | U/T-D | U/T-D | U/T-D |
| 5 1/2 in (140 mm) | U/T-D | U/T-D | U/T-D |
| 6 1/2 in (168 mm) | U/T-D | U/T-D | U/T-D |
| 7 in (178 mm) | U/T | U/T | U/T-D |
| 9 1/2 in (244 mm) | U/T | — | U/T |
Data source: Technical data table.
| Dimension | Value |
|---|---|
| Weight per half | 500 lb (226.8 kg) |
| Weight per set | 1,000 lb (453.6 kg) |
| Temperature range | Up to 350°F (177°C) |
| Ram size range | 3 1/2 in to 9 1/2 in depending on model |
UltraTemp rams use high-temperature elastomer compounds that maintain sealing performance at elevated temperatures up to 350°F. They operate in the same hydraulic ram cavity as standard NXT rams and are available in U/T and U/T-D configurations.
When selecting replacement UltraTemp rams, verify:
Shaffer NXT UltraTemp Rams are suitable for high-temperature drilling and well control operations, including geothermal, high-pressure high-temperature (HPHT) wells, and other applications where standard elastomers may degrade.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Tell us your expected operating temperature, pipe O.D., and pressure rating, and HYRIG engineers will confirm the correct UltraTemp ram configuration.
Q: What is the maximum temperature for UltraTemp Rams? A: Up to 350°F (177°C).
Q: What is the difference between U/T and U/T-D? A: Both are UltraTemp designs; U/T-D is used for selected smaller sizes and pressure ratings. Confirm with HYRIG for your specific application.
Q: Are UltraTemp Rams available for 15,000 psi? A: Yes, selected sizes are available for 15,000 psi NXT/SLXT BOPs.
Q: What is the lead time? A: Contact HYRIG for current availability.
For Shaffer NXT UltraTemp Rams selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.