Shaffer LWS 11" 3M Top Seals — Matching & Quote | HYRIG

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Top Seals (Bonnet Seals) for the Shaffer LWS 11" 3M BOP. Geometry varies by bonnet configuration — HYRIG matches your exact assembly from nameplate details and seal dimensions.
Conatct For Details
DetailReview(0)Additional

Key Facts

  • BOP Model: Shaffer LWS, 11" bore, 3M (3,000 psi) working pressure
  • Part Type: Top Seals (Bonnet Seals) — seal the interface between the BOP body and the door/bonnet
  • Matching Policy: HYRIG does not publish a single standalone P/N without verifying the exact BOP assembly, due to Shaffer LWS bonnet configuration variations
  • Material Options: NBR, HNBR, FKM depending on temperature and fluid compatibility
  • Quality Check: Hardness and dimensional tolerance verified against OEM spec

Fitment Check

ConditionAction
Replacing a top seal during door maintenanceProvide the BOP nameplate and existing seal dimensions for exact matching
BOP requires H2S serviceSpecify NACE MR0175 compliance for the top seal elastomer
You have the OEM part numberSend the P/N directly to info@hyrig.com for a cross-reference and quote

Common field error: ordering a top seal based solely on BOP bore size without confirming the specific bonnet face profile.

Not Applicable To

Related Pages

Contact

To get the correct Shaffer LWS 11" 3M top seal, email info@hyrig.com with:

  • BOP nameplate photo
  • Existing top seal photo or measurements (ID, OD, thickness)
  • Quantity
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit