Our API 610 solvent underground tank pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable recovery and transfer of sulfolane solvent from underground storage tanks in aromatics complexes, refineries, petrochemical plants, and extractive distillation units. The solvent stored in these underground tanks consists of a mixture of sulfolane (tetrahydrothiophene‑1,1‑dioxide), water, and trace hydrocarbons (HCBN) – the primary solvent used in the Sulfolane process for BTX (benzene, toluene, xylenes) recovery. This solvent is a critical component of the aromatics extraction process and must be transferred safely and reliably to the extraction unit.
Sulfolane is a polar aprotic solvent with a high boiling point (287.3°C). While pure sulfolane is non‑corrosive, during circulation it can accumulate degradation products (SO₂, H₂S, organic acids) that make the fluid corrosive. The presence of water and trace hydrocarbons adds complexity to the fluid composition. Pumps for this service demand exceptional corrosion resistance, robust sealing, and reliable performance in low‑NPSH underground tank suction conditions.
API 610 Classifications for Solvent Underground Tank Duties
VS – Vertically Suspended Pumps (Preferred for Underground Tank & Low‑NPSH Transfer)
For pumping sulfolane solvent from underground storage tanks with limited NPSH, VS1 (vertical turbine) and VS6 (vertical can/barrel) types are the standard and preferred solution. The first‑stage impeller is submerged below the minimum liquid level, ensuring excellent NPSH performance and eliminating priming issues – critical when handling low‑NPSH underground tank applications. Long column lengths are available for deep underground tank installations. The vertical configuration saves valuable plot space and reduces fugitive emission risks.
BB – Between Bearings Pumps
For high‑capacity solvent transfer from underground tank pump‑out systems to the extraction unit or storage, BB pumps provide superior rotor stability and long‑term reliability. BB2 (radially split, single‑stage) configurations are specified for flows exceeding 200 m³/h and heads up to 250 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life.
OH – Overhung Pumps
For smaller solvent transfer applications, withdrawal from shallower tanks, or emergency duties, OH pumps offer a compact and economical solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are suitable for small‑scale transfer and emergency pumping. Centreline mounting accommodates thermal expansion.
Key Performance & Design Features
Flow Range – Capacities from 5 m³/h to 2,000 m³/h, covering all underground tank solvent transfer requirements.
Head Range – Up to 300 metres for high‑head transfer to processing units.
Temperature Range – Designed for sulfolane solvent from ambient to 120°C (248°F), with appropriate material selection.
NPSH Performance – VS pumps with submerged impellers deliver extremely low NPSH requirements (<1.5 metres), eliminating cavitation risk.
Corrosion Resistance – Wetted parts in duplex stainless steel (D‑1), super duplex stainless steel (D‑2), or high‑alloy materials to withstand sulfolane corrosion and degradation products (SO₂, H₂S, organic acids).
Erosion Resistance – Hard facing on wear rings and impeller shrouds to resist erosion from any solid particles that may be present.
Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are recommended for sulfolane service to prevent leakage of corrosive solvent. Suitable flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling and quench to maintain seal integrity.
Casing Design – Robust casings with replaceable wear plates and liners; vapour‑tight covers and vent connections to prevent air ingress and VOC release.
Bearing & Lubrication – Heavy‑duty bearings (product‑lubricated for VS, oil‑lubricated for BB/OH) with temperature and vibration monitoring for reliable operation.
Impeller Options – Closed impellers for efficient handling; open or semi‑open designs for streams with potential fouling or solids.
Typical Applications
Sulfolane solvent transfer from underground storage tanks to extraction units
Solvent recovery and circulation from underground tank farms
Pumping from underground solvent storage to process units
Underground tank pump‑out for inventory management and solvent supply
Solvent transfer in aromatics extraction and extractive distillation processes
Industries Served
Petrochemicals (aromatics production, BTX recovery)
Oil refineries (aromatics complexes)
Chemical processing (solvent extraction and purification)
Product storage and terminal facilities
Why Choose Our Solvent Underground Tank Pumps?
With extensive experience in corrosive solvent handling and full API 610 compliance, we design and manufacture solvent underground tank pumps that deliver unmatched safety, reliability, and environmental protection. Every pump undergoes rigorous performance testing, hydrostatic testing, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised column lengths, materials, impeller designs, and seal systems to match your specific sulfolane composition, temperature, and operating conditions. Our engineering support includes NPSH analysis, corrosion resistance evaluation, emissions control advisory, and API 684 rotor dynamics to ensure safe, long‑term, trouble‑free operation.
Contact Us
For technical datasheets, selection assistance, or a project‑specific quotation, please contact us at:
info@hyrig.com
Rely on our API 610 solvent underground tank pumps to safely and efficiently transfer sulfolane solvent from your underground storage.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.