Water Injection Pumps – API 610 BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 water injection pumps are available in BB, OH, and VS designs, specifically engineered for reliable high‑pressure injection and transfer of water in enhanced oil recovery (EOR), boiler feed systems, power generation, and industrial water management. BB pumps provide superior rotor stability for high‑flow, high‑pressure main injection duties. OH pumps offer compact solutions for moderate‑pressure services, while VS pumps handle low‑NPSH suction from water storage tanks. Built with stainless steel, duplex, and corrosion‑resistant materials. Fully API 610/ISO 13709 compliant for reliable, long‑life water injection service.

Conatct For Details
DetailReview(0)Additional

Our API 610 water injection pumps are heavy‑duty centrifugal pumps engineered specifically for reliable high‑pressure injection and transfer of water in enhanced oil recovery (EOR), boiler feed systems, power generation, chemical processing, and industrial water management applications. Water injection is a critical process used to maintain reservoir pressure in oil recovery, supply high‑pressure boiler feed water, and provide process water for various industrial operations. These pumps must deliver consistent high‑pressure performance with absolute reliability, corrosion resistance, and long service life.

Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for maximum safety, reliability, and longevity in the most demanding water injection applications. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with selection based on flow rate, head, NPSH availability, and installation requirements.

API 610 Classifications for Water Injection Duties

  • BB – Between Bearings Pumps
    For main high‑capacity, high‑pressure water injection duties, BB pumps provide superior rotor stability and long‑term reliability. BB1 (axially split, double‑suction) and BB2 (radially split, single‑stage or two‑stage) configurations are commonly specified for flows from 50 to 5,000 m³/h and heads up to 500 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life – critical for continuous, high‑duty injection operations. Double‑suction designs (BB1) balance axial thrust at high flows. BB5 barrel‑type multistage pumps are also available for extreme high‑pressure injection duties exceeding 200 barg.

  • OH – Overhung Pumps
    For moderate‑capacity water injection, booster duties, or smaller systems, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for water injection in smaller‑scale EOR, boiler feed make‑up, and industrial water transfer applications. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 1,500 m³/h and heads up to 250 metres.

  • VS – Vertically Suspended Pumps
    In applications where water is drawn from low‑NPSH storage tanks, sumps, or underground reservoirs, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space.

Key Performance & Design Features

  • Flow Range – Capacities from 5 m³/h to 5,000 m³/h, covering all water injection requirements.

  • Head Range – Up to 500 metres for high‑head injection duties.

  • Temperature Range – Designed for water from ambient to 120°C (248°F), with appropriate material selection.

  • Pressure Rating – Discharge pressures from 10 barg to over 400 barg, matching injection system requirements.

  • Corrosion Resistance – Wetted parts in stainless steels (304L, 316L, duplex), high‑alloy materials, and corrosion‑resistant coatings to withstand water corrosion and maintain water quality.

  • Sealing – API 682 mechanical seals – single or dual (tandem) seals depending on service requirements. Suitable flush plans (Plan 11, 13, 23, 32) with cooling to maintain seal integrity.

  • Casing Design – Robust casings with replaceable wear rings; smooth internal surfaces to minimise scale deposition.

  • Bearing & Lubrication – Heavy‑duty bearings (oil or grease lubricated) with temperature and vibration monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; corrosion‑resistant coatings for enhanced durability.

  • Driver Options – Compatible with electric motors (VFD‑ready), diesel engines, and turbine drives.

Typical Applications

  • Water injection for enhanced oil recovery (EOR) and reservoir pressure maintenance

  • High‑pressure boiler feed water injection

  • Industrial process water transfer and injection

  • Cooling water circulation and make‑up

  • Fire water and emergency water supply systems

  • Reverse osmosis (RO) feed and high‑pressure permeate transfer

  • Chemical dilution and reagent mixing water supply

Industries Served

  • Oil refineries and petrochemicals (process water injection)

  • Power generation (boiler feed and cooling water)

  • Chemical manufacturing (pure water handling)

  • Enhanced oil recovery (EOR) projects

  • Industrial water treatment facilities

  • Mining and mineral processing

Why Choose Our Water Injection Pumps?

With extensive experience in high‑pressure water handling and full API 610 compliance, we design and manufacture water injection pumps that combine reliability, efficiency, and corrosion resistance. Every pump undergoes rigorous performance testing, hydrostatic testing, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet international specifications. We offer customised hydraulic designs, material selections, surface finishes, and sealing arrangements to match your specific pressure, temperature, and flow requirements. Our engineering support includes NPSH analysis, API 684 rotor dynamics, material compatibility evaluation, and system integration advice to ensure seamless, trouble‑free operation.

Contact Us

For technical datasheets, selection assistance, or a customised quotation, please contact us at:

info@hyrig.com

Rely on our API 610 water injection pumps to deliver reliable, high‑pressure water for your critical injection and process systems.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit